Skip to main content

Toyota to invest $500 million in Uber for driverless cars

UPDATED: 8/27/18 9:32 pm ET - adds details

Toyota Motor Corp. will invest $500 million in Uber to jointly work on developing self-driving cars, the companies said on Monday, a bid by both to catch up to rivals in the hotly competitive autonomous driving business.

Toyota, one of the world's largest carmakers, and Uber Technologies Inc., the leading ride-hailing service, are widely seen as lagging the competition in developing self-driving cars. The partnership deepens an existing relationship and reflects CEO Dara Khosrowshahi's strategy of Uber developing autonomous vehicles through partnerships, rather than on its own.

The deal also breathes new life into Uber's self-driving business. Since a self-driving Uber SUV killed a pedestrian in Tempe, Ariz., in March, Uber has removed its robot cars from the road, laid off hundreds of test drivers and shuttered operations in Arizona, its autonomous testing hub.

The investment values Uber at $72 billion, matching the valuation Uber received in a deal with Alphabet Inc. self-driving unit Waymo this year.

The deal was reported earlier Monday by The Wall Street Journal.

Uber will combine its autonomous driving system with Toyota's Guardian technology, which offers automated safety features such as lane-keeping but does not enable a vehicle to drive completely autonomously. The combined technology will be built into Toyota's Sienna minivans, to be deployed on Uber's ride-hailing network starting in 2021, Uber said.

The companies' aim is to solve the enormously challenging problem of how to mass produce self-driving cars for shared fleets, including ride-hailing services.

!function(d, s) {var ip = d.createElement(s);ip.async = 1, s = d.getElementsByTagName(s)[0], ip.src = "//s.idio.co/ip.js", s.parentNode.insertBefore(ip, s)}(document, "script");$(function() { $idoWidget = $('#idio-article-recommendations-8'); $imageContainer = $idoWidget.prev().prev(); $imageEle = $imageContainer.children('img'); if ($imageEle && $imageEle.length > 0) { $imageContainer.insertAfter($idoWidget); }});

Jeff Miller, Uber's head of business development for strategic initiatives, said the partnership "really paints the picture of how we envision deploying autonomous technology in the long term." That includes licensing its autonomous technology to carmakers and enlisting a third party to own and maintain the fleet.

The third party that will operate the Toyota autonomous fleet has not yet been chosen, Miller said.

Toyota has been less aggressive than some rivals on moving toward full-fledged autonomous driving, expressing caution about the technology, and has focused on partial autonomous systems like Guardian. But the company has invested in research and said it plans to begin testing self-driving electric cars around 2020.

A Toyota official said the company would continue its research into self-driving technology, and that it would not combine its research efforts with Uber.

Uber has admitted its technology lags Waymo, and the crash in Arizona was a further setback in development and testing. The Toyota partnership puts pressure on Uber to resume testing on public roads, but the company has run up against regulators and politicians with safety concerns. Miller said Uber plans to have autonomous cars back on public streets by the end of the year.

Khosrowshahi, who took over Uber a year ago, has recently explored options that include more partnerships as well as a potential sale of the self-driving business, separate sources have told Reuters. The self-driving unit is a significant contributor to Uber's losses, which in the second quarter were $891 million.

Uber has a deal to purchase cars from Volvo, outfit them with Uber's technology and maintain them, a more labor-intensive project than the Toyota plans. The company also has a partnership with Daimler AG, in which the carmaker proposes to put its own self-driving cars in Uber's ride-hailing network.

Khosrowshahi's partnership strategy is a shift. Uber co-founder and former CEO Travis Kalanick had insisted on developing a proprietary self-driving system and called autonomous cars "existential" to Uber.

Previously, Uber and Toyota partnered on an electric mobility project. Two years ago, Toyota invested an undisclosed sum in Uber and the two companies partnered on a car-leasing program for Uber drivers. Uber has since shuttered its U.S. leasing business.

ATTENTION COMMENTERS: Automotive News has monitored a significant increase in the number of personal attacks and abusive comments on our site. We encourage our readers to voice their opinions and argue their points. We expect disagreement. We do not expect our readers to turn on each other. We will be aggressively deleting all comments that personally attack another poster, or an article author, even if the comment is otherwise a well-argued observation. If we see repeated behavior, we will ban the commenter. Please help us maintain a civil level of discourse.


View the original article here

Comments

Popular posts from this blog

2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) A L L Diagnostic Trouble Codes ( DTC ): P Code Charts P1240

2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948)     A L L  Diagnostic Trouble Codes ( DTC ): P Code Charts P1240 The CAN bus is malfunctioning.   Test 1: Check the CAN communication with control unit Engine control module.   Test 2: Possible cause: - Drive train CAN bus Affected functions: - Engine diagnosis - Fuel system 1. Check the CAN communication with control unit Engine control module. Important note A CAN timeout fault code is set due to the absence of a CAN input signal.The cause of this may be not only the transmitter control unit, but also the CAN networking.Possible cause and remedy - Check CAN communication with affected control unit. - Check other control units for vehicle CAN bus failure in the stored faults. - CAN bus has loose contact or Open circuit. Continue with button F 2 Warning!Communication with ECU required. 2. No further information available.

2019 Mercedes-Benz X-Class

Launched for the brand new 3-Series coupe and convertible and provided on all engine variants, M Sport cars include a raft of extra equipment as standard compared to an SE model. Furthermore, passive safety is offered thanks to standard tools akin to seven airbags and the i-Size attachment system for 2 little one seats. Standard safety gear includes antilock disc brakes, stability and traction management, aspect airbags, side curtain airbags, knee airbags and Mercedes-Benz's "mbrace" emergency telematics system. The SLS is supposed to be Mercedes-Benz's ultimate vehicle, however it is also meant to be extra affordable and sensible to drive than the now-discontinued Mercedes SLR McLaren. Twelve (more than one-third) of the above differences are in the double digits. Although the price is affordable or not, are the primary disadvantages of space and rear seats for Mercedes-Benz C-Class 220 CDI vibration motor in the city. In case your body kit includes entrance and/or r...

Mercedes Benz C 300 4MATIC # LI80-57_P-051521 Date: 110601 30 Steering/Starting - No Crank/Start/ESL And ICM Don't Respond No Crank/No Start/ESL and ICM do not respond to key input

 Mercedes Benz C 300 4MATIC # LI80-57_P-051521 Date: 110601   30 Steering/Starting - No Crank/Start/ESL And ICM Don't Respond No Crank/No Start/ESL and ICM do not respond to key input Topic number LI80.57-P-051521 Version 1 Design group 80.57 Drive authorization systems (DAS) Date 06-01-2011 Validity All 204, 207 model vehicles Reason for change Complaint 1. No crank / no start / intermittent no crank 2. Communication via SDS to Electronic Ignition Switch N73 (EIS/EZS), and or short test may or may not be possible at time of fault 3. Below scenario: ^ When accessing the occupants compartment, the message center in the ICM will illuminate (note: eventually the message center will time out and shut down, and will not illuminate until the CAN is activated via the interior lock/unlock switch). ^ The key will turn in EIS N73. ^ The ESL N26/5 does not activate/respond (or the steering wheel remains unlocked at all times). ^ The warning icons in the ICM will not il...

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 2499

2.1.3.2.1.4. Check power supply at control unit N15/3 (ETC [EGS] control unit). Test 2.1.3.2.1.4.1: Guided test 2.1.3.2.1.4.1. Guided test Operation number of operation texts and work units or standard texts and flat rates:27-0641Possible cause - Battery has incorrect charge state or is faulty. - Local undervoltage of component N15/3 (ETC [EGS] control unit) Test sequence - Erase fault memory. Continue with button "F2" Warning!Communication with ECU required. 2.1.3.2.1.5. Check power supply at control unit N15/5 (Electronic selector lever module control unit). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test sequence - Switch off ignition. - Disconnect connector at component N15/5 (Electronic selector lever module control unit). - Switch on ignition. - [A.2] Measure direct voltage with multimeter between 2 and 1 [A.1] Status of relevant actual value: - Supply voltage (tml. 15):Warning! Communication with ECU required. Specified ...

2010 Cadillac Truck SRX AWD V6-3.0L Page 1240

2010 Cadillac Truck SRX AWD V6-3.0L Page 1240 Diagnosis (Without Special Tool) (See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Component Tests and General Diagnostics/Alcohol/Contaminants-in-Fuel Diagnosis (Without Special Tool)). * Missing, restricted, or leaking exhaust components-Refer to Symptoms - Engine Exhaust (See: Engine, Cooling and Exhaust/Exhaust System/Testing and Inspection/Symptoms - Engine Exhaust). * Malfunctioning fuel injectors-Refer to Fuel Injector Solenoid Coil Test (LAU) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Testing and Inspection)Fuel Injector Solenoid Coil Test (LF1, LFW) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Testing and Inspection). * Vacuum hoses for splits, kinks, and improper connections * Insufficient fuel in the tank * Low fuel pressure-Refer to Fuel System Diagnosis (LF1 China) (See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Test...

Check the CAN communication with control unit N80 (Steering column module). Interior CAN bus

Part 1 One or more messages from control unit N80 (Steering column module) are not available on the CAN bus. Possible cause: Check the CAN communication with control unit N80 (Steering column module). Interior CAN bus Affected functions: CAN Communication Automatic transmission Function ------------------------------------------------- Test 1: Engine compartment CAN test Test 2: Check the CAN communication with control unit N80 (Steering column module). Test 3: Interior CAN check Engine compartment CAN test Test 1.1: Procedure in case of CAN faults Test 1.2: Evaluation of CAN fault codes Test 1.3: Further CAN test options Procedure in case of CAN faults Test 1.1.1: How do I quickly reach my goal? Test 1.1.2: General test information Test 1.1.3: General CAN fundamentals Test 1.1.4: Possible aids and their usage How do I quickly reach my goal? How do I quickly reach my goal?First call up menu item 'Evaluation of CAN...

Relay 'Circuit 87' ( Engine ) (P2505)

P2505 Relay 'Circuit 87' ( Engine ) (P2505) Possible cause: ­ N3/10 (ME­SFI [ME] control unit) ­ K40/4kK (Engine electronics and chassis relay) Affected functions: ­ Battery / On­board electrical system ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Check power supply of component N3/10 (ME­SFI [ME] control unit). Test 2: Arrangement of fuses Page 2562010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 257 1. Check power supply of component N3/10 (ME­SFI [ME] control unit). Test 1.1: Test voltage supply of circuit 87. 1.1. Test voltage supply of circuit 87. Figure legend ­ A ­ConnectionTest cable 35­pin socket box ­ 001 ­Sockets of component N3/10 (ME­SFI [ME] control unit) ­ 05 ­35­pin socket box ­ 050 ­126­pin socket box ­ 108 ­Test cable 266 589 01 63 00 ­ N3/10 (ME­SFI [ME] control unit) ­ II 1­63ConnectionTest cable ­ III 64­126ConnectionTest cable Warning! ­ ­ Connection A of test ca...

A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM ECO start/stop inoperative, fault code P0944 in transmission control unit

Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts Technical Service Bulletin # LI27-57_P-0534962 Date: 120522 2010 Mercedes Benz SL 550 (230.471) V8-5.5L (273.965)   Page 29 A/T - ECO Start/Stop Inoperative, DTC P0944 Stored In TCM ECO start/stop inoperative, fault code P0944 in transmission control unit Topic number LI27.57-P-053496 Version 2 Design group 27.57 Oil pump Date 05-22-2012 Validity NAG2 FEPlus (722.9) with auxiliary oil pump with code B03 up to transmission sequence number 7.248.200 Reason for change Model series 251 deleted because model series 251 does not have ECO start/stop. Complaint: ECO start/stop inoperative, fault code P0944 in transmission control unit. Attachments Cause: Check valve in torque converter housing may be damaged. Leakage between torque converter housing and auxiliary oil pump. May affect transmissions with transmission sequence numbers starting with -07-xxx xxx. Remedy: Access v...

Mercedes Benz SLK 55 AMG No CAN message was received from control unit Engine management.

2010 Mercedes Benz SLK 55 AMG (171.473) V8-5.5L (113.989) Copyright ? 2013, ALLDATA 10.52SS Page 1 A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts Part 1 No CAN message was received from control unit Engine management. Possible cause: - Fault in CAN communication with control unit Motor electronics. - Drive train CAN bus Affected functions: - CAN Communication - Automatic transmission Function ------------------------------------------------- Test 1: Engine compartment CAN test Test 2: Check the CAN communication with control unit Engine management. Test 3: Drive train CAN test 1. Engine compartment CAN test Test 1.1: Procedure in case of CAN faults Test 1.2: Evaluation of CAN fault codes Test 1.3: Further CAN test options 1.1. Procedure in case of CAN faults Test 1.1.1: How do I quickly reach my goal? Test 1.1.2: General test information Test 1.1.3: General CAN fundamentals Test 1.1.4: Possible aids and their usage 1.1.1. How do I quickly reach...