Skip to main content

Mercedes Benz Truck R 320 BLUETEC Technical LI42-45_P-051202 Date: 121002 ABS/TCS - 'ESP Malfunction-Service Required' ON Message in instrument cluster "ESP Malfunction - Service Required" after engine start

Mercedes Benz Truck R 320 BLUETEC Technical
LI42-45_P-051202 Date: 121002
ABS/TCS - 'ESP Malfunction-Service Required' ON
Message in instrument cluster "ESP Malfunction - Service Required" after engine start
Topic number LI42.45-P-051202
Version 1
Design group 42.45 Electronic Stability Program (ESP), Stability Control (SR)
Date 10-02-2012
Validity Model series 164 up to 11/2010
Model series 251 up to 11/2010
Reason for change
Complaint:
After engine start the ESP warning lamp (yellow triangle) flashes and the message "ESP Malfunction - Service Required" and/or "BAS Malfunction
- Service Required" appears in the instrument cluster after a few seconds.
The vehicle may lock by itself when stationary.
Note:
At least two of the following codes
^ 5102 and/or
^ 5112 and/or
^ 5122 and/or
^ 5132
must be present in the ESP control unit (ESP CU) (N47-5).
Cause:
An implausible wheel speed sensor (DZS) signal is detected by the ESP CU.
Mercedes Benz Truck R 320 BLUETEC
Page 7
Remedy:
Replace all 4 wheel speed sensors and, if necessary, install modified brake hose intermediate bracket.
When installing the brake hose intermediate bracket ensure that this is correctly positioned and fastened on the steering knuckle.
Symptoms
Control unit/fault code
Parts
Mercedes Benz Truck R 320 BLUETEC
Page 8
WIS-References

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...