Skip to main content

Mercedes Benz Truck R 320 BLUETEC Technical S-42_10-110 Date: 090616 Brakes - Brake Pad Paste Usage

Mercedes Benz Truck R 320 BLUETEC Technical S-42_10-110 Date: 090616
Brakes - Brake Pad Paste Usage
Date: June 16, 2009
Order No.: S-B-42.10/110
Supersedes:
Group: 42
SUBJECT:
MY-All, Models All
Mercedes Benz Truck R 320 BLUETEC
Page 238
Brake Pad Paste Usage
Mercedes Benz Truck R 320 BLUETEC
Page 239
When performing repair or maintenance work on the brake system it is imperative that only the specified brake pad paste is used. Different models
and brake variants may use different types of brake paste (Figures 1-3). Please reference any corresponding LIs, DTBs and or WIS document
AR42.10-P-0161-01B for paste type and application location. Do not apply too much paste, only a light coating of brake paste is required when
instructed.
Warning!
Under no circumstances should aftermarket brake paste or anti-squeal type chemicals be used on brake components. These chemicals are not
approved by Mercedes-Benz, and their affect on brake components is unknown.
Warning!
Never apply brake paste or any other chemicals to the brake pad friction surfaces.
Note:
Failure to follow guidelines for proper brake paste usage may result in brake noise issues.
Parts Information

Labels

Labels:
Location: Pacific Crest Trail, South Lake Tahoe, CA 96150, USA

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...
Read more

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...
Post a Comment
Read more

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...
Post a Comment
Read more