Mercedes Benz Truck R 320 BLUETEC Technical S-32_22-78A Date: 090506
Suspension - Visit Workshop Mssg/DTCs 5320/5250/5260
Date: May 6, 2009
Order No.: S-B-32.22/78a
Supersedes: S-B-32.22/78 dated March 31, 2009
Group: 32
Revision History
Revision Date Purpose
a 5/6/09 WIS Document Reference Added (211.2)
- 3/31/09 Initial issue
SUBJECT:
All Model 164, 211, 219, 221 and 251 Vehicles Equipped with Airmatic
Suspension (Sales Code 489)
"Airmatic - Visit Workshop" Displayed Within Instrument Cluster
Mercedes Benz Truck R 320 BLUETEC
Page 244
If you receive customer reports in the above model vehicles of "Airmatic Visit Workshop" being displayed within the instrument cluster and the
respective fault code listed below, perform the following.
Note:
Do not unplug the connector at the drain valve, as it is necessary to inspect the harness connector and compressor in their original untouched state.
1. Cut the drain valve wire harness 10 cm before connector.
2. Install the new wire harness repair kit.
3. Replace the Airmatic compressor. Refer to the applicable WIS document.
Note:
This condition is the result of excessive resistance at the connector of the Airmatic compressor's drain valve.
Parts Information
Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on
March 31, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.
Mercedes Benz Truck R 320 BLUETEC
Page 245
In Case of Warranty, use the table above.
