Mercedes Benz Truck ML 350 (164.156) Technical # LI58-40_P-048526 Date: 091125
Computers/Control - DAS/XD Add-On 2009-09-28-1266
DAS/XD ADD-ON 2009-09-28-1266 FOR PASSENGER CARS
Topic number LI58.40-P-048526
Version 1
Design group 58.40 Workshop equipment/MB testers
Page 168
Date 11-25-2009
Validity DVD version 09/2009
Reason for change
Reason for block
Complaint:
CDID2
Model series: 204, 212
DAS personalizing cannot be performed
MCMSFL221 / MCMSFR221
Model series: 221 model ref. pkge.
Multicontour seat fails during air release procedure. The system becomes operational again after an ignition change.
Fault code 9E8900 is stored.
TV tuner
Model series: 221, 216
Notes adjusted with respect to. coding/extended options. Required in case of replacement of TV-05 (221) with TV-09 (221 model refinement
package).
SRS/airbag
Model series: X204
FC A208 cannot be erased even when stored.
ME
Model series: 204, 207, 212
Control unit programming for software 0094487540 reports: "The following control unit software versions are available for control unit
programming: 0094487540" After control unit programming, the control unit cannot be started up.
DTR
Model series: 221, 216
Control unit programming for hardware object number 2125450416 reports:
"The following control unit software versions are available for control unit programming: 2214420956" The control unit cannot be programmed."
CDI 5
Model series: 211
Control unit programming for software object number 010 448 51 40 reports: "No newer control unit software found".
ME
Model series: 451
Control unit programming for software object numbers 033 447 24 02 and 017 448 27 02 reports: "No newer control unit software found".
ME 9.7
Model series: 221
Control unit programming for several software object numbers reports: "No newer control unit software found".
Page 169
ESP
Model series: 230
Control unit programming for software object numbers 230 448 02 02 and 211 448 08 02 reports: "No newer control unit software found".
ME 9.7
Model series: 219, 171
Control unit programming for hardware object number 0034467640 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 204
Control unit programming for software object number 002 448 48 10 reports: "No newer control unit software found".
DCU-RF
Model series: 221
Control unit programming for hardware object number 221 870 96 91 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 207
Control unit programming for software object number 002 448 54 10 reports: "No newer control unit software found".
ME9.7 (AMG)
Model series: 216, 221, 230
Control unit programming for several software object numbers reports: "No newer control unit software found".
ETC
Model series: 164, 251
The new transmission control unit VGS3NAG2 could not previously be programmed.
All flashable CUs
Model series: 204, 207, 212
FDOK redocumentation of CVN is not performed during SCN coding - SCN coding on vehicles with China variant of COMAND not possible. -
Enabling offline control unit programming not possible.
SIM271DE20
Model series: 204, 207, 212
SCN is not written during SCN coding
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-09-28-1266 for passenger cars:
This add-on can be installed over DAS/XD version 09/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Page 170
Symptoms
Page 171
Page 172
Page 173
Page 174
Page 175
Page 176
Page 177
Page 178
Page 179
Page 180
Page 181
Page 182
Page 183
Page 184
Page 185
Page 186
Page 187
Page 188
Page 189
Page 190
Page 191
Page 192
Page 193
Page 194
Page 195
Control unit/fault code
Page 196
Computers/Control - DAS/XD Add-On 2009-09-28-1266
DAS/XD ADD-ON 2009-09-28-1266 FOR PASSENGER CARS
Topic number LI58.40-P-048526
Version 1
Design group 58.40 Workshop equipment/MB testers
Page 168
Date 11-25-2009
Validity DVD version 09/2009
Reason for change
Reason for block
Complaint:
CDID2
Model series: 204, 212
DAS personalizing cannot be performed
MCMSFL221 / MCMSFR221
Model series: 221 model ref. pkge.
Multicontour seat fails during air release procedure. The system becomes operational again after an ignition change.
Fault code 9E8900 is stored.
TV tuner
Model series: 221, 216
Notes adjusted with respect to. coding/extended options. Required in case of replacement of TV-05 (221) with TV-09 (221 model refinement
package).
SRS/airbag
Model series: X204
FC A208 cannot be erased even when stored.
ME
Model series: 204, 207, 212
Control unit programming for software 0094487540 reports: "The following control unit software versions are available for control unit
programming: 0094487540" After control unit programming, the control unit cannot be started up.
DTR
Model series: 221, 216
Control unit programming for hardware object number 2125450416 reports:
"The following control unit software versions are available for control unit programming: 2214420956" The control unit cannot be programmed."
CDI 5
Model series: 211
Control unit programming for software object number 010 448 51 40 reports: "No newer control unit software found".
ME
Model series: 451
Control unit programming for software object numbers 033 447 24 02 and 017 448 27 02 reports: "No newer control unit software found".
ME 9.7
Model series: 221
Control unit programming for several software object numbers reports: "No newer control unit software found".
Page 169
ESP
Model series: 230
Control unit programming for software object numbers 230 448 02 02 and 211 448 08 02 reports: "No newer control unit software found".
ME 9.7
Model series: 219, 171
Control unit programming for hardware object number 0034467640 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 204
Control unit programming for software object number 002 448 48 10 reports: "No newer control unit software found".
DCU-RF
Model series: 221
Control unit programming for hardware object number 221 870 96 91 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 207
Control unit programming for software object number 002 448 54 10 reports: "No newer control unit software found".
ME9.7 (AMG)
Model series: 216, 221, 230
Control unit programming for several software object numbers reports: "No newer control unit software found".
ETC
Model series: 164, 251
The new transmission control unit VGS3NAG2 could not previously be programmed.
All flashable CUs
Model series: 204, 207, 212
FDOK redocumentation of CVN is not performed during SCN coding - SCN coding on vehicles with China variant of COMAND not possible. -
Enabling offline control unit programming not possible.
SIM271DE20
Model series: 204, 207, 212
SCN is not written during SCN coding
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-09-28-1266 for passenger cars:
This add-on can be installed over DAS/XD version 09/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Page 170
Symptoms
Page 171
Page 172
Page 173
Page 174
Page 175
Page 176
Page 177
Page 178
Page 179
Page 180
Page 181
Page 182
Page 183
Page 184
Page 185
Page 186
Page 187
Page 188
Page 189
Page 190
Page 191
Page 192
Page 193
Page 194
Page 195
Control unit/fault code
Page 196
