Skip to main content

Mercedes Benz Truck ML 350 (164.156) Technical # S-27_19-118A Date: 110701 A/T - Electrohydraulic Control Unit ID & Ordering


Mercedes Benz Truck ML 350 (164.156) Technical  # S-27_19-118A Date: 110701
A/T - Electrohydraulic Control Unit ID & Ordering
Date: July 1, 2011
Order No.: S-B-27.19/118a
Supersedes: S-B-27.19/118, April 29, 2010
Group: 27
Revision History
Revision Date Purpose
a 7/1/10 Procedure 2-3 ordering notes modified
  Page 109
SUBJECT:
MY-All, Transmission 722.9 in Models
164, 171, 203, 204, 207, 209, 211, 212, 215, 216, 219, 220, 221, 230, 251, 463
Ordering Notes for Electrohydraulic Control Unit
The following information clarifies how to determine the correct electrohydraulic control units.
A. Procedure 1a
1. Diagnosis on the vehicle is possible:
2. To determine the correct EHS part number, the currently installed EHS should first be read out with the Star diagnosis.
a. Xentry Diagnostics:
^ via the path "Control units view" - "Current quick test" - "Fully integrated transmission control" - "EHS part number".
^ Ordering the new EHS with this read out part number.
b. DAS:
^ "Quick test" > "EGS > electronic transmission control serial number".
^ Ordering the new EHS with this read out serial number.
B. Procedure 1b
Diagnosis on the vehicle is no longer possible, as the control unit no longer responds. Therefore, the number must be read off directly by the EHS
and the ordering process is started with this number.
C. Procedure 2
1. Read out part number A 220 270 14 06
2. This part number was replaced by A 220 270 13 06 or by A 220 270 18 06, depending on the vehicle model range.
For this the following must be observed for correct ordering:
Model 209, 211, 215, 219, 220, 230 with transmission 722.901
A 220 270 14 06 replaced by
A 220 270 18 06 replaced by
A 220 270 31 06
  Page 110
Model 209 with transmission 722.902 and engine 642.910 up to 5/31/2007
A 220 270 14 06 replaced by
A 220 270 21 06 replaced by
A 220 270 29 06
Model 209 with transmission 722.902 and engine 642.910 as of 6/1/2007
A 220 270 14 06 replaced by
A 220 270 19 06 replaced by
A 220 270 32 06
Model 164, 251 with transmission 722.901
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 164, 203 with transmission 722.902
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 171, 209, 211, 219 and 230.471 with transmission 722.904
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 221 with transmission 722.906
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 171 with transmission 722.907
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
D. Procedure 3
1. Read out the part number A 220 270 12 06
2. For this the following must be observed for correct ordering:
^ Model 219.356, 171.456 with transmission 722.906 up to and including model year 2005 (code 805)
A 220 270 12 06.
^ For all other baumusters/model designations (except 219.356, 171.456) order with the read off part number A 220 270 12 06
A 220 270 12 06 replaced by
  Page 111
A 220 270 18 06 replaced by
A 220 270 31 06

Popular posts from this blog

For BMW X5 E70 2006-2013 Electric Parking Handbrake Brake Switch Button E7CX

29,62 CAD Date de fin: dimanche sept.-22-2019 10:53:26 CEST Achat immédiat pour seulement: 29,62 CAD Achat immédiat | Ajouter à vos Affaires à suivre

2013 Mercedes Benz Truck GLK 350 4MATIC Becker MAP PILOT: Message "No navigation module connected" appears in the display fault code 953B

Vehicle: All Technical Service Bulletins Navigation ­ Becker(R)MAP PILOT 'No Navigation Module Connected Becker MAP PILOT: Message "No navigation module connected" appears in the display Version 2 Design group 82.61 Auto pilot system (APS), Audio 30 APS Date 04­24­2013 Validity Model 117, 166, 172, 176, 204, 207, 212, 218, 242, 246 with Becker MAP PILOT (code 509) or preinstallation for Becker MAP PILOT (code 508) Reason for change Complaint: The Audio/COMAND display (A40/8) of the Becker MAP Pilot continuously or intermittently shows the message "No navigation module connected".. This message appears even though the navigation module (A2/30) is correctly locked in the bracket (A2/30­1) in the glove box. Cause: 1.) Software in navigation module (A2/30). 2.) The tightening torque of the threaded connection between the bracket (A2/30­1) and the glove box is too high. This leads to mechanical stress between the bracket (A2/30­1) and the navigat...

A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts 0319 The injection valve output stage of cylinder 2 detects a line discontinuity. (P0202)

2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948)       Copyright ? 2013, ALLDATA     10.52SS        Page 1 A L L  Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts 0319 The injection valve output stage of cylinder 2 detects a line discontinuity. (P0202) Possible cause: - Y62y2 (Fuel injector cylinder 2) - N10/1kI (Circuit 87 relay, engine) - N10/1f43 (Fuse 43) - Voltage supply via component Z7/38 (Circuit 87 M1i connector sleeve) Affected functions: - Engine diagnosis - Engine running ------------------------------------------------   Test 1: Check power supply of component N3/10 (ME-SFI [ME] control unit).   Test 2: Arrangement of fuses   Test 3: Power supply   Test 4: Check component Y62y2 (Fuel injector cylinder 2). 1. Check power supply of component N3/10 (ME-SFI [ME] control unit).   Test 1.1: Test voltage supply of circuit 87. ( Check using actual value )   Test 1.2: ...

2010 Cadillac Truck SRX FWD V6-3.0L Page 435

2010 Cadillac Truck SRX FWD V6-3.0L Page 435 Schematics) * Video System Schematics (See: Accessories and Optional Equipment/Diagrams/Electrical Diagrams/Video System Schematics) Connector End View Reference Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name) Description and Operation Navigation System Description and Operation (See: Accessories and Optional Equipment/Description and Operation/Navigation System) Electrical Information Reference * Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit Testing/Circuit Testing) * Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Connector Repairs/Connector Repairs) * Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit Testing/T...

Maintenance: All Technical Service Bulletins TPMS System - Tire Pressure Monitor Inop./DTC 5581 DISPLAY MESSAGE "TIRE PRESSURE MONITOR INOPERATIVE" DTC 5581 Topic Number LI40.15-P-046651

******************************************************************** 2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) Copyright ? 2013, ALLDATA 10.52SS Page 1 Maintenance: All Technical Service Bulletins TPMS System - Tire Pressure Monitor Inop./DTC 5581 DISPLAY MESSAGE "TIRE PRESSURE MONITOR INOPERATIVE" DTC 5581 Topic Number LI40.15-P-046651 Version 1 Design Group 40.15 Tire pressure/tire pressure monitoring Date 09-24-2009 Validity Model 171.454/456/458/473 Model 204.054/056/077/081/956/987 Reason for change: Instructions revised foe Xentry/Supersedes DTB S-B-40.15/68 Reason for block Complaint: Display Message "Tire pressure Monitor Inoperative" DTC 5581 Cause: If you receive customer reports in the above model vehicles of the instrument cluster displaying "Tire Pressure Monitor Inoperative" and there is a corresponding stored fault code of 5581 (front or rear sensor localization failed), this is because the diff...

P2440

P2440 The secondary air valve (cylinder bank 1) is jammed open. (P2440) Possible cause: ­ Y32 (Air pump switchover valve) Affected functions: ­ Engine diagnosis ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Check component Y32 (Air pump switchover valve). 1. Check component Y32 (Air pump switchover valve). Test 1.1: Test actuation of component Y32 (Air pump switchover valve). Test 1.2: Test current consumption of component Y32 (Air pump switchover valve). 1.1. Test actuation of component Y32 (Air pump switchover valve). Test sequence ­ ­ Operate engine at idling speed. Actuate component Y32 (Air pump switchover valve).(Actuate with key F2.) Warning!Communication with ECU required. 10.52SS Page 2182010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS 1.2. Test current consumption of component Y32 (Air pump switchover valve). Figure legend ­ A ­ConnectionTest cable 35­pin socket box ­ 001 ­Sockets of compone...

How fast is Tesla Supercharging?

 Tesla Supercharging is extremely fast compared with standard home or public chargers , but the exact speed depends on the Tesla model, battery level, and charger type . Here’s a detailed breakdown: ⚡ Tesla Supercharging Speeds 1. V2 Superchargers Max power: 150 kW DC Typical charging rate: ~170–180 miles of range per 30 minutes (Model 3/Y) Slower at high battery levels: Charging speed drops above ~80% to protect battery health 2. V3 Superchargers Max power: 250 kW DC Typical charging rate: Up to 1,000 miles per hour theoretical (on ideal battery) Practically, ~180–220 miles of range in 15 minutes Each car charges independently at full speed (no sharing slowdown like V2) ⏱ Charging Times (0 → 80%) Tesla Model Charger Type Approximate Time Model 3 Standard/Long Range V3 ~20–25 min Model Y Long Range V3 ~25 min Model S Long Range V3 ~30 min Model X Long Range V3 ~30–35 min Charging from 80% → 100% is slower because Superchargers reduce power to protect battery life. 🧠 Factors A...

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Do Toyota Used Cars Have A good Popularity

When Mercedes Benz designed the American model of this automotive, their first precedence was security. Identical applies to a stolen automobile, if you buy one, the police take it and you get nothing, even when you've got a receipt and all the paperwork. He dropped out of the Art Heart Faculty of Design in Pasadena to get an internship at Pininfarina. Learn motor trend鈥檚 acura mdx hybrid assessment to get the latest info on fashions, costs, specs, mpg, gasoline economy and photos. If on your own comprise any business enterprise information or any upgrade relating to your objects and suppliers, then by your self must employ the service of utility for electronic signage in route of clearly present it. What's the best plan, and are prolonged service contracts worth the money? A special view: I feel Cadillac and Lincoln is the very best luxury car brands however they're excessive in value, however not like these brands in the above answers. Earlier than we solely dream and ima...