Skip to main content

Mercedes Benz Truck GLK 350 technical problem S-80_61-61A Date: 130404 Mercedes Benz Truck GLK 350 222 Antitheft System - 'Replace Key Battery' Message Displayed

Mercedes Benz Truck GLK 350 technical problem S-80_61-61A Date: 130404
 Mercedes Benz Truck GLK 350 222
Antitheft System - 'Replace Key Battery' Message Displayed
Date: April 4, 2013
Order No.: S-B-80.61/61a
Supersedes: S-B-80.61/61, March 2013
Group: 80
Revision a: Updated with notes indicating key information required.
SUBJECT:
All Model Vehicles with Keys that have One Battery
Instrument Cluster Message "Replace Key Battery"
Customer Complaint:
The message "Replace Key Battery" is displayed. Key battery life is perceived by the customer as being too short.
Condition/Background:
Product Technical Support is requesting specific data in order to further evaluate the technical aspects of this complaint.
Action:
Please open a PTSS case and include the following information in the case (scenario 1 & 2 below requires you to open and close the case with no
interaction from DTS):
Note:
If you have Excel, fill out the excel sheet in STAR TekInfo under DTS -> KG Key Battery Test Sheet and attach to case. If you attach the
excel sheet to the case, then you do not have to re-enter the information indicated below in the case.
Required Case Information per incoming complaint associated Key:
Key Number - Indicate key number (check via SDS)
Key Date Code - Date code of the (last 4 digits on barrel)
Brand - The brand of the battery (Duracel, Panasonic, etc.)
Tensioned - Does service history indicate previously tensioned
contacts?
Enhanced - Does service history indicate previously cleaned/enhanced
contacts?
Battery Voltage - Measured voltage of battery currently in the key
Optional Case Information:
Driving Frequency- How many times a day, on average, does the customer
get in and out of their vehicle? Do they get in and out
20 times, 2 times, 8 times?
Ride length - What is the average drive length per drive cycle? This is
important because the KG system pings the keys every
5km for 20km - for a total of 5 times per drive cycle
max.
Driving habits - Where does the customer keep their key when driving?
Parking Habits - Where does the customer park their car? Do they lock it?
Do they keep the key in the vehicle overnight?
When creating the case, please use the symptom string > Overall vehicle > Safety and locking system > Locks/locking/Remote closing mechanism >
Discharged battery.
After creating a case, please proceed according to the following applicable scenario:
Scenario 1 - The key battery has never been replaced.
Please perform the following actions:
 Mercedes Benz Truck GLK 350 223
^ Tension the battery contacts (both center and side)
^ Clean the contacts using contact cleaner A 008 989 55 71 (both center and side)
^ Replace the battery with Mercedes-Benz part number A 000 828 03 88
^ Measure voltage of replacement key battery
Scenario 1 case closure - indicate the following per outgoing complaint associated key:
^ Key number
^ Key battery was replaced
^ Brand of replacement battery
^ Contacts tensioned and cleaned
^ Measured voltage of replacement key battery
Note:
Cases submitted without incoming and outgoing key information, per key claimed, will have their corresponding warranty claims denied.
Scenario 2 - Repeat complaint for this particular key number, key battery has been previously replaced and any of the following were not completed
(according to service history):
^ Tension the battery contacts (both center and side)
^ Clean the contacts using contact cleaner A008 989 55 71 (both center and side)
^ Installation of Mercedes-Benz sourced battery (part number A 000 828 03 88)
Please perform the following actions:
^ Replace the battery with Mercedes-Benz part number A 000 828 03 88
^ Tension the battery contacts (both center and side)
^ Clean the contacts using contact cleaner A 008 989 55 71 (both center and side)
^ Measure voltage of replacement key battery
Scenario 2 case closure - indicate the following per outgoing complaint associated key:
^ Key number
^ Key battery was replaced
^ Contacts tensioned and cleaned
^ Brand of replacement battery
^ Measured voltage of replacement battery
Note:
Cases submitted without incoming and outgoing key information, per key claimed, will have their corresponding warranty claims denied.
Scenario 3 - Repeat complaint for this particular key number, key battery has been previously replaced and all of the following were completed
(according to service history):
^ Tension the battery contact
^ Clean the contacts using contact cleaner A008 989 55 71
^ Installation of Mercedes-Benz sourced battery (part number A 000 828 03 88)
Please perform the following actions:
 Mercedes Benz Truck GLK 350 224
^ Open DTS case and follow the instructions received from Dealer Technical Support.
Scenario 3 case closure - indicate the following per outgoing key.
^ Key number
^ Key battery or key was replaced
^ Contacts tensioned and cleaned
^ Brand of replacement battery or brand of battery in replacement key
^ Measured voltage of replacement battery or battery in replacement key
NOTE:
Cases submitted without incoming and outgoing key information, per key claimed, will have their corresponding warranty claims denied.
Parts Information
In Case of Warranty
 Mercedes Benz Truck GLK 350 225
Key Battery Information FormMercedes Benz

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...