Mercedes Benz S 550 4MATIC Technical Problem #LI58-40_P-048777 Date: 100107
Computers/Controls - DAS/XD Add-On 2009-12-07-1327
DAS/XD ADD-ON 2009-12-07-1327 FOR PASSENGER CARS
Topic number LI58.40-P-048777
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 01-07-2010
Validity DVD version 11/2009
Reason for change
Reason for block
Complaint:
IC
Model series: 164, 251
Fault message in symptom "After replacement and (or) programming of the control unit, unjustified warning messages for the stationary heater
appear on the display."
CDID2
Model series: 204, 212
DAS initialization cannot be performed
ME97 / MED97 / ME97AMG
Model series: 204, 207, 212
The engine control unit refuses to activate drive authorization.
SIM4CNG
Model series: 211
Coding of engine control unit not possible.
TSGVL9, TSGVR9, TSGHL9, TSGHR9, TSGML9, TSGMR9
Model series: 221
Coding in diagnosis per factory specifications is not possible
AUDIO/COMAND
Model series: 207, 212
Audio50 or COMAND: Control unit programming cannot be started if other MOST components (e.g. media interface, DAB) are installed.
SRS/airbag
Model series: X204
If the SM for the X204 cannot be successfully completed in the first run (e.g. communication problem, OBD connector disconnected etc.), it is not
possible to repeat the initial startup procedure (fault message -99 after CU programming).
Cause:
For all complaints: XD and DAS diagnostic data.
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968) Page 274
Remedy:
DAS/XD add-on 2009-12-07-1327 for passenger cars:
This add-on can be installed over DAS/XD version 11/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
Control unit/fault code
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968) Page 275
Validity
Computers/Controls - DAS/XD Add-On 2009-12-07-1327
DAS/XD ADD-ON 2009-12-07-1327 FOR PASSENGER CARS
Topic number LI58.40-P-048777
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 01-07-2010
Validity DVD version 11/2009
Reason for change
Reason for block
Complaint:
IC
Model series: 164, 251
Fault message in symptom "After replacement and (or) programming of the control unit, unjustified warning messages for the stationary heater
appear on the display."
CDID2
Model series: 204, 212
DAS initialization cannot be performed
ME97 / MED97 / ME97AMG
Model series: 204, 207, 212
The engine control unit refuses to activate drive authorization.
SIM4CNG
Model series: 211
Coding of engine control unit not possible.
TSGVL9, TSGVR9, TSGHL9, TSGHR9, TSGML9, TSGMR9
Model series: 221
Coding in diagnosis per factory specifications is not possible
AUDIO/COMAND
Model series: 207, 212
Audio50 or COMAND: Control unit programming cannot be started if other MOST components (e.g. media interface, DAB) are installed.
SRS/airbag
Model series: X204
If the SM for the X204 cannot be successfully completed in the first run (e.g. communication problem, OBD connector disconnected etc.), it is not
possible to repeat the initial startup procedure (fault message -99 after CU programming).
Cause:
For all complaints: XD and DAS diagnostic data.
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968) Page 274
Remedy:
DAS/XD add-on 2009-12-07-1327 for passenger cars:
This add-on can be installed over DAS/XD version 11/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
Control unit/fault code
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968) Page 275
Validity
