Skip to main content
Mercedes Benz S 550 4MATIC  Technical Problem #LI58-40_P-048526 Date: 091125
Computers/Control - DAS/XD Add-On 2009-09-28-1266
DAS/XD ADD-ON 2009-09-28-1266 FOR PASSENGER CARS
Topic number LI58.40-P-048526
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 11-25-2009
Validity DVD version 09/2009
Reason for change
Reason for block
Complaint:
CDID2
Model series: 204, 212
DAS personalizing cannot be performed
MCMSFL221 / MCMSFR221
Model series: 221 model ref. pkge.
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 206
Multicontour seat fails during air release procedure. The system becomes operational again after an ignition change.
Fault code 9E8900 is stored.
TV tuner
Model series: 221, 216
Notes adjusted with respect to. coding/extended options. Required in case of replacement of TV-05 (221) with TV-09 (221 model refinement
package).
SRS/airbag
Model series: X204
FC A208 cannot be erased even when stored.
ME
Model series: 204, 207, 212
Control unit programming for software 0094487540 reports: "The following control unit software versions are available for control unit
programming: 0094487540" After control unit programming, the control unit cannot be started up.
DTR
Model series: 221, 216
Control unit programming for hardware object number 2125450416 reports:
"The following control unit software versions are available for control unit programming: 2214420956" The control unit cannot be programmed."
CDI 5
Model series: 211
Control unit programming for software object number 010 448 51 40 reports: "No newer control unit software found".
ME
Model series: 451
Control unit programming for software object numbers 033 447 24 02 and 017 448 27 02 reports: "No newer control unit software found".
ME 9.7
Model series: 221
Control unit programming for several software object numbers reports: "No newer control unit software found".
ESP
Model series: 230
Control unit programming for software object numbers 230 448 02 02 and 211 448 08 02 reports: "No newer control unit software found".
ME 9.7
Model series: 219, 171
Control unit programming for hardware object number 0034467640 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 204
Control unit programming for software object number 002 448 48 10 reports: "No newer control unit software found".
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 207
DCU-RF
Model series: 221
Control unit programming for hardware object number 221 870 96 91 reports: "Control unit software versions are available for control unit
programming". After control unit programming, the control unit cannot be started up.
ETC
Model series: 207
Control unit programming for software object number 002 448 54 10 reports: "No newer control unit software found".
ME9.7 (AMG)
Model series: 216, 221, 230
Control unit programming for several software object numbers reports: "No newer control unit software found".
ETC
Model series: 164, 251
The new transmission control unit VGS3NAG2 could not previously be programmed.
All flashable CUs
Model series: 204, 207, 212
FDOK redocumentation of CVN is not performed during SCN coding - SCN coding on vehicles with China variant of COMAND not possible. -
Enabling offline control unit programming not possible.
SIM271DE20
Model series: 204, 207, 212
SCN is not written during SCN coding
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-09-28-1266 for passenger cars:
This add-on can be installed over DAS/XD version 09/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 208
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 209
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 210
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 211
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 212
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 213
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 214
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 215
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 216
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 217
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 218
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 219
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 220
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 221
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 222
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 223
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 224
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 225
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 226
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 227
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 228
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 229
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 230
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 231
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 232
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 233
Control unit/fault code
2010 Mercedes Benz S 550 4MATIC (221.186) V8-5.5L (273.968)    Page 234

Labels

Labels:

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...
Read more

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...
Post a Comment
Read more

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...
Post a Comment
Read more