Mercedes Benz G550 Technical Service Bulletin #S-27_19-118A Date: 110701 A/T - Electrohydraulic Control Unit ID & Ordering

Mercedes Benz G550 Technical Service Bulletin #S-27_19-118A
Date: 110701
A/T - Electrohydraulic Control Unit ID & Ordering
Date: July 1, 2011
Order No.: S-B-27.19/118a
Supersedes: S-B-27.19/118, April 29, 2010
Group: 27
Revision History
Revision Date Purpose
a 7/1/10 Procedure 2-3 ordering notes modified
SUBJECT:
MY-All, Transmission 722.9 in Models
164, 171, 203, 204, 207, 209, 211, 212, 215, 216, 219, 220, 221, 230, 251, 463
Ordering Notes for Electrohydraulic Control Unit
The following information clarifies how to determine the correct electrohydraulic control units.
A. Procedure 1a
1. Diagnosis on the vehicle is possible:
2. To determine the correct EHS part number, the currently installed EHS should first be read out with the Star diagnosis.
a. Xentry Diagnostics:
^ via the path "Control units view" - "Current quick test" - "Fully integrated transmission control" - "EHS part number".
^ Ordering the new EHS with this read out part number.
b. DAS:
^ "Quick test" > "EGS > electronic transmission control serial number".
^ Ordering the new EHS with this read out serial number.
B. Procedure 1b
Diagnosis on the vehicle is no longer possible, as the control unit no longer responds. Therefore, the number must be read off directly by the EHS
and the ordering process is started with this number.2010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963)

C. Procedure 2
1. Read out part number A 220 270 14 06
2. This part number was replaced by A 220 270 13 06 or by A 220 270 18 06, depending on the vehicle model range.
For this the following must be observed for correct ordering:
Model 209, 211, 215, 219, 220, 230 with transmission 722.901
A 220 270 14 06 replaced by
A 220 270 18 06 replaced by
A 220 270 31 06
Model 209 with transmission 722.902 and engine 642.910 up to 5/31/2007
A 220 270 14 06 replaced by
A 220 270 21 06 replaced by
A 220 270 29 06
Model 209 with transmission 722.902 and engine 642.910 as of 6/1/2007
A 220 270 14 06 replaced by
A 220 270 19 06 replaced by
A 220 270 32 06
Model 164, 251 with transmission 722.901
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 164, 203 with transmission 722.902
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 171, 209, 211, 219 and 230.471 with transmission 722.904
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 221 with transmission 722.906
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
A 220 270 27 06
Model 171 with transmission 722.907
A 220 270 14 06 replaced by
A 220 270 13 06 replaced by
Page 592010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963)

Page 60
A 220 270 27 06
D. Procedure 3
1. Read out the part number A 220 270 12 06
2. For this the following must be observed for correct ordering:
^ Model 219.356, 171.456 with transmission 722.906 up to and including model year 2005 (code 805)
A 220 270 12 06.
^ For all other baumusters/model designations (except 219.356, 171.456) order with the read off part number A 220 270 12 06
A 220 270 12 06 replaced by
A 220 270 18 06 replaced by
A 220 270 31 06

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V86.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: A80 (Intelligent servo module for DIRECT SELECT) Affected functions: Drive position selection Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:270641Possible cause and remedy Internal fault in control unit Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**: - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**: - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**: - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**: - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...

Mercedes Benz

Search This Blog