Mercedes Benz SLK 55 AMG A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts E2806
2010 Mercedes Benz SLK 55 AMG (171.473) V8-5.5L (113.989) Copyright ? 2013, ALLDATA 10.52SS Page 1
A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts
E2806
Component Y3/8s1 (Selection range sensor (VGS)) is not learned.
Possible cause:
- Y3/8s1 (Selection range sensor (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component Y3/8s1 (Selection range sensor (VGS)) is not taught in
1. Remedial action if component Y3/8s1 (Selection range sensor (VGS)) is not taught in
Customer complaint
- It is not possible to teach in the selection range sensor after removing/installing component Y3/8 (Electric control unit (VGS)).An error
message occurs during initial startup with STAR DIAGNOSIS, although the shift rod is adjusted correctly.
- The error message reads: the prerequisites are not fulfilled or the peripherals are not operational.
Cause
- When installing component Y3/8 (Electric control unit (VGS)), the retaining bolt of the detent plate was not inserted into the plastic bracket of
the selector range valve.
Remedy
- Remove component Y3/8 (Electric control unit (VGS)).
- Install component Y3/8 (Electric control unit (VGS)), ensuring that the retaining bolt is inserted into the plastic bracket of the selector range
valve.
- Teach in component Y3/8s1 (Selection range sensor (VGS)).
End of information
1. No further information available.
********************************************************************
A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts
E2806
Component Y3/8s1 (Selection range sensor (VGS)) is not learned.
Possible cause:
- Y3/8s1 (Selection range sensor (VGS))
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if component Y3/8s1 (Selection range sensor (VGS)) is not taught in
1. Remedial action if component Y3/8s1 (Selection range sensor (VGS)) is not taught in
Customer complaint
- It is not possible to teach in the selection range sensor after removing/installing component Y3/8 (Electric control unit (VGS)).An error
message occurs during initial startup with STAR DIAGNOSIS, although the shift rod is adjusted correctly.
- The error message reads: the prerequisites are not fulfilled or the peripherals are not operational.
Cause
- When installing component Y3/8 (Electric control unit (VGS)), the retaining bolt of the detent plate was not inserted into the plastic bracket of
the selector range valve.
Remedy
- Remove component Y3/8 (Electric control unit (VGS)).
- Install component Y3/8 (Electric control unit (VGS)), ensuring that the retaining bolt is inserted into the plastic bracket of the selector range
valve.
- Teach in component Y3/8s1 (Selection range sensor (VGS)).
End of information
1. No further information available.
********************************************************************
