Mercedes Benz SLK 55 AMG A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts E0602
2010 Mercedes Benz SLK 55 AMG (171.473) V8-5.5L (113.989) Copyright ? 2013, ALLDATA 10.52SS Page 1
A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts
E0602
Control module Y3/8n4 (Fully integrated transmission control (VGS) control unit) is not coded.
Possible cause:
- Coding error.
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action for non-coded control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
1. Remedial action for non-coded control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Operation number of operation texts and work units or standard texts and flat rates:27-0641POSSIBLE CAUSES
- SCN coding for control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit) was not performed.
- The coding data were not or were not completely transferred to the memory of control unit Y3/8n4 (Fully integrated transmission control
(VGS) control unit).
REMEDY
- Repeat SCN variant coding.
NOTEIf repeated attempts at SCN coding were not successful, please notify the Hotline. Continue with button "F2"
Warning!Communication with ECU required.
********************************************************************
A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts
E0602
Control module Y3/8n4 (Fully integrated transmission control (VGS) control unit) is not coded.
Possible cause:
- Coding error.
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action for non-coded control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
1. Remedial action for non-coded control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)
Operation number of operation texts and work units or standard texts and flat rates:27-0641POSSIBLE CAUSES
- SCN coding for control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit) was not performed.
- The coding data were not or were not completely transferred to the memory of control unit Y3/8n4 (Fully integrated transmission control
(VGS) control unit).
REMEDY
- Repeat SCN variant coding.
NOTEIf repeated attempts at SCN coding were not successful, please notify the Hotline. Continue with button "F2"
Warning!Communication with ECU required.
********************************************************************
