Skip to main content

Mercedes Benz E 63 AMG Sedan Antitheft System - DAS3 Diagnosis/Replacement Info. DIAGNOSIS AND REPLACEMENT OF DAS3 COMPONENTS (KEY, EIS, ESL)

********************************************************************

2010 Mercedes Benz E 63 AMG Sedan (212.077) V8-6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 1
Vehicle: All Technical Service Bulletins
Antitheft System - DAS3 Diagnosis/Replacement Info.
DIAGNOSIS AND REPLACEMENT OF DAS3 COMPONENTS (KEY, EIS, ESL)
Topic number LI80.57-P-046935
Version 2
Design group 80.57 Drive authorization systems (DAS)
Date 10-28-2009
Validity All Model 164, 171, 203, 204, 207, 209, 211, 212, 219
and 251 Vehicles
Reason for change Added applicable models / Supersedes DTB SB-80.57/24c
Reason for block
Complaint:
Diagnostic procedures for the DAS3 Drive Authorization System have been revised for models listed above. Please proceed as follows when
diagnosing systems conditions.
Cause:
N/A
Remedy:
Select Control units -> Body -> EIS -> "Guided transmitter key check" or "Guided drive authorization system check"
Select the respective guided check. A guided diagnosis follows which is used to pinpoint the component that is causing the condition. Do not replace
any component before performing this diagnosis. Always perform the diagnosis in its entirety until SDS identifies the component to be replaced. At
the end of the test steps, the user will be prompted to print the results. When submitting a claim, copies of this printout and a quick test must
accompany the parts. The warranty claim may be debited a handling charge if the printout and the quick test do not accompany the parts.
Applied diagnostic steps are stored in the EIS (Electronic Ignition Switch) and ESL (Electric Steering Lock) components. The diagnostic steps
utilized by the dealer will be electronically verified by the QEC to determine if the control unit performed the diagnostic procedure. If it is
determined that a complete diagnosis was not performed, the warranty claim may be debited a handling charge.
Note:
Both vehicle keys are required to ensure a proper diagnosis. Please be sure that both keys will be available when the repair appointment is made. If
this is not possible, ensure you have the correct diagnosis path when conducting diagnosis in SDS.
Symptoms
2010 Mercedes Benz E 63 AMG Sedan (212.077) V8-6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 2
2010 Mercedes Benz E 63 AMG Sedan (212.077) V8-6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 3
Validity

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...