********************************************************************
2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) Copyright ? 2013, ALLDATA 10.52SS Page 1
Maintenance: All Technical Service Bulletins
Wipers/Washers - 'Low Washer Fluid Level' Warning
WASHER FLUID INDICATOR ON INSTRUMENT CLUSTER INCORRECT
Topic number LI82.35-P-048244
Version 1
Design group 82.35 Windshield washing system
Date 10-28-2009
Validity Model 169 with code U58
Model 245 with code U58,
Model 204, 216, 212
Model GLK 204, 164, 251, 221
Reason for change Applicable models and remedy updated / Supersedes
DTB P-B-82.35/587 and T-B-82.35/588
Reason for block
Complaint:
Washer fluid indicator is not correct.
Indicator on instrument cluster shows that reservoir is empty although the reservoir contains sufficient windshield washer fluid.
Cause:
The electrical conductivity of the fluid in the washer fluid reservoir is not sufficient due to:
a) The use of distilled or deionized water,
b) Tap water content of mixing ratio is too low or
c) Proportion of winter washer fluid concentrate is too high (antifreeze protection approx.100%)
The electrical circuit cannot be closed by the 2-pin sensor and the message "Washer fluid reservoir empty" appears in the display of the instrument
cluster.
Remedy:
Fill the reservoir with washer concentrate and tap water at the recommended mixing ratio (see owner's manual).
Note:
It is assumed that the connectors to the washer fluid level sensor are plugged in and the lines have no function impairments.
Replacement of the SAM control unit or the current washer fluid level sensor does not rectify the issue.
Symptoms
Parts
2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) Copyright ? 2013, ALLDATA 10.52SS Page 2
Validity
2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) Copyright ? 2013, ALLDATA 10.52SS Page 1
Maintenance: All Technical Service Bulletins
Wipers/Washers - 'Low Washer Fluid Level' Warning
WASHER FLUID INDICATOR ON INSTRUMENT CLUSTER INCORRECT
Topic number LI82.35-P-048244
Version 1
Design group 82.35 Windshield washing system
Date 10-28-2009
Validity Model 169 with code U58
Model 245 with code U58,
Model 204, 216, 212
Model GLK 204, 164, 251, 221
Reason for change Applicable models and remedy updated / Supersedes
DTB P-B-82.35/587 and T-B-82.35/588
Reason for block
Complaint:
Washer fluid indicator is not correct.
Indicator on instrument cluster shows that reservoir is empty although the reservoir contains sufficient windshield washer fluid.
Cause:
The electrical conductivity of the fluid in the washer fluid reservoir is not sufficient due to:
a) The use of distilled or deionized water,
b) Tap water content of mixing ratio is too low or
c) Proportion of winter washer fluid concentrate is too high (antifreeze protection approx.100%)
The electrical circuit cannot be closed by the 2-pin sensor and the message "Washer fluid reservoir empty" appears in the display of the instrument
cluster.
Remedy:
Fill the reservoir with washer concentrate and tap water at the recommended mixing ratio (see owner's manual).
Note:
It is assumed that the connectors to the washer fluid level sensor are plugged in and the lines have no function impairments.
Replacement of the SAM control unit or the current washer fluid level sensor does not rectify the issue.
Symptoms
Parts
2010 Mercedes Benz C 300 4MATIC (204.081) V6-3.0L (272.948) Copyright ? 2013, ALLDATA 10.52SS Page 2
Validity
