A L L Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts
0218
Temperature of gear oil is too high.
Possible cause:
- Temperature of gear oil is too high.
Affected functions:
- Automatic transmission Function
-------------------------------------------------
Test 1: Remedial action if transmission oil temperature is too high
1. Remedial action if transmission oil temperature is too high
Operation number of operation texts and work units or standard texts and flat rates:27-0641 Error response:- Control unit Y3/8n4 (Fully integrated
transmission control (VGS) control unit) initiates a reduction of the engine torque in relation to the measured transmission oil temperature.- The
reduction of the engine torque necessarily produces a power loss in the engine.POSSIBLE CAUSES
- This fault code may have resulted from the transmission having previously gone into emergency mode, or from stored fault code 2759.
REMEDY
- If fault codes are present, process these.
- Check transmission oil cooling for proper operation and for leakage.
- Perform condition check of the transmission oil.(Continue with button "F6")
1. No further information available.
