Skip to main content

Mercedes-Benz E400

The E-Class comes in an array of different body styles -- Sedan, Coupe, Cabriolet and Wagon -- which are complemented by five different engines.
All E-Class models come with a 7-speed automatic transmission. E350 models are the starting point up the price ladder, with their 302-horsepower, 3.5L V6. Above that, it's the E400, powered by a turbocharged 3.0L V6 making 330 horsepower. 4MATIC all-wheel drive is available on the E350 and E400. At the top of the line, there's the performance-focused AMG E63 S, with its 585-hp, 5.5L twin-turbocharged V8.
Environmentally minded shoppers have a solid option in the E250 BlueTEC, which makes an impressive 42 mpg on the highway from its 195-horsepower 2.1L 4-cylinder turbodiesel. The E250 BlueTEC is available with 4MATIC as well.
No matter the model, the E-Class has a classic luxury-sedan interior, with appointments that are impressive and upscale yet not too flamboyant. Coupes and Cabriolets have less backseat space -- with seating for four instead of five -- but an AirCap system in Cabriolet models helps limit air turbulence with the top down. Ride comfort is top-notch through the lineup, too, and a driver-adjustable suspension system is included, while V8 models get air shocks to increase comfort without additional body motion.
On the AMG E63 S, standard equipment includes a navigation system, enhanced voice control, a rearview camera system, an Active Multicontour Driver seat, heated and active ventilated front seats, Adaptive Highbeam Assist, bi-xenon headlamps with Active Curve Illumination, additional corner-illuminating lamps, an electronic trunk closer and Keyless Go.
Standard equipment across the E-Class model line includes power front seats (with three-position memory), Smart Key entry, dual-zone climate control, cruise control, an integrated garage-door opener, rain-sensing intermittent wipers and ambient lighting. The COMAND screen- and controller-based system is also included, wrapping together radio, DVD/CD and a Bluetooth interface, as well as other media through a memory-card slot.
All E-Class models also include Attention Assist, a feature that studies the driver's steering patterns, alerting the driver with a coffee-cup icon and instrument-cluster message if, when traveling between 50 and 112 mph, it suspects drowsy driving.
The E-Class has several other noteworthy active-safety options. Night View Assist Plus uses infra-red light from beams mounted within the headlights to help see ahead nearly 500 feet--and see pedestrians up to 300 feet earlier than without the system, thanks to a screen built into the instrument cluster. There's also Distronic Plus, a sensor system that now includes Blind Spot Assist and Park Assist. Distronic Plus cars also have Pre-Safe, a system that can automatically apply full braking for an impending collision.
Blind Spot Assist and Lane Keeping Assist are offered together in a Lane Tracking Package, while the Driver Assistance Package brings Distronic Plus, Active Blind Spot Assist, and Active Lane Keeping Assist. Some of the desirable luxury features and conveniences are grouped together into Premium 1 and Premium 2 packages, while standalone options include a rear side airbag, Parktronic parking guidance, split folding rear seats, a heated steering wheel, a 115-volt power outlet and a rear-seat entertainment system, among many others

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...

D138, Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...