********************************************************************P0598
R48 (Twodisk thermostat heating element) : Short circuit to ground (P0598)
Possible cause:
R48 (Twodisk thermostat heating element)
Affected functions:
Heating
Engine cooling
Test 1: Check component R48 (Twodisk thermostat heating element).
1. Check component R48 (Twodisk thermostat heating element).
Test 1.1: Component R48 (Twodisk thermostat heating element) is mechanically damaged or it sticks.
Test 1.2: Test current consumption of component R48 (Twodisk thermostat heating element).
1.1. Component R48 (Twodisk thermostat heating element) is mechanically damaged or it sticks.
Test 1.1.1: R48 (Twodisk thermostat heating element) : Coolant temperature is not reached.
Test 1.1.2: R48 (Twodisk thermostat heating element) : Coolant temperature is too high.
1.1.1. R48 (Twodisk thermostat heating element) : Coolant temperature is not reached.
Warning!Communication with ECU required.
1.1.2. R48 (Twodisk thermostat heating element) : Coolant temperature is too high.
Warning!Communication with ECU required.
1.2. Test current consumption of component R48 (Twodisk thermostat heating element).
10.52SS
Page 442010 Mercedes Benz E 63 AMG Sedan (212.077) V86.3L (156.985)
Copyright ? 2013, ALLDATA
10.52SS
Page 45
Figure legend
A ConnectionTest cable 35pin socket box
001 Sockets of component N3/10 (MESFI [ME] control unit)
05 35pin socket box
050 126pin socket box
108 Test cable 266 589 01 63 00
N3/10 (MESFI [ME] control unit)
II 163ConnectionTest cable
III 64126ConnectionTest cable
Warning!
Connection A of test cable 108 may NOT be connected to connection B of the 126pin socket box (050).
Test sequence
Switch off ignition.
Connect socket box (126pin) to component N3/10 (MESFI [ME] control unit).
Measure direct current with multimeter between sockets [F.4] 100 and [M.54] 54 of the 126pole socket box tester.
Switch on ignition.
Specified value:
Amperage[0.6...1.2] A
Question
Is the measurement value OK?
YES
The measurement value is OK.End of test
NO
The measurement value is not OK.Possible cause and remedy
K40/4f44 (Fuse 44)
K40/4kM (Circuit 30z relay)
Check lines from component N3/10 (MESFI [ME] control unit) to component R48 (Twodisk thermostat heating element).2010 Mercedes Benz E 63 AMG Sedan (212.077) V86.3L (156.985)
Copyright ? 2013, ALLDATA
R48 (Twodisk thermostat heating element)
End of test
R48 (Twodisk thermostat heating element) : Short circuit to ground (P0598)
Possible cause:
R48 (Twodisk thermostat heating element)
Affected functions:
Heating
Engine cooling
Test 1: Check component R48 (Twodisk thermostat heating element).
1. Check component R48 (Twodisk thermostat heating element).
Test 1.1: Component R48 (Twodisk thermostat heating element) is mechanically damaged or it sticks.
Test 1.2: Test current consumption of component R48 (Twodisk thermostat heating element).
1.1. Component R48 (Twodisk thermostat heating element) is mechanically damaged or it sticks.
Test 1.1.1: R48 (Twodisk thermostat heating element) : Coolant temperature is not reached.
Test 1.1.2: R48 (Twodisk thermostat heating element) : Coolant temperature is too high.
1.1.1. R48 (Twodisk thermostat heating element) : Coolant temperature is not reached.
Warning!Communication with ECU required.
1.1.2. R48 (Twodisk thermostat heating element) : Coolant temperature is too high.
Warning!Communication with ECU required.
1.2. Test current consumption of component R48 (Twodisk thermostat heating element).
10.52SS
Page 442010 Mercedes Benz E 63 AMG Sedan (212.077) V86.3L (156.985)
Copyright ? 2013, ALLDATA
10.52SS
Page 45
Figure legend
A ConnectionTest cable 35pin socket box
001 Sockets of component N3/10 (MESFI [ME] control unit)
05 35pin socket box
050 126pin socket box
108 Test cable 266 589 01 63 00
N3/10 (MESFI [ME] control unit)
II 163ConnectionTest cable
III 64126ConnectionTest cable
Warning!
Connection A of test cable 108 may NOT be connected to connection B of the 126pin socket box (050).
Test sequence
Switch off ignition.
Connect socket box (126pin) to component N3/10 (MESFI [ME] control unit).
Measure direct current with multimeter between sockets [F.4] 100 and [M.54] 54 of the 126pole socket box tester.
Switch on ignition.
Specified value:
Amperage[0.6...1.2] A
Question
Is the measurement value OK?
YES
The measurement value is OK.End of test
NO
The measurement value is not OK.Possible cause and remedy
K40/4f44 (Fuse 44)
K40/4kM (Circuit 30z relay)
Check lines from component N3/10 (MESFI [ME] control unit) to component R48 (Twodisk thermostat heating element).2010 Mercedes Benz E 63 AMG Sedan (212.077) V86.3L (156.985)
Copyright ? 2013, ALLDATA
R48 (Twodisk thermostat heating element)
End of test