2010 Mercedes
Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)
Vehicle: Customer Interest
Audio/COMAND(R) - Volume In AUX Menu Is Erratic
Audio AUX: Volume of AUX Audio Source Is Too Quiet
Topic number L182.85-P-047991
Version 2
Design Group 82.85 Navigation and communication systems (CNS, ICS, COMAND,
FleetBoard)
Date 06-12-2012
Validity Model 204.0, 204.2, 207, 212 with code 523, 510, 525, 511, 527 or
512 and 808, 809, 800 or 801 (NTG4)
Model 204.9 with code 523, 510, 525, 511 527 or 512 and 808, 809, 800, 801 or
802 (NTG4)
Model 169,245, 171,230,211,219, 164,251 and 203.7 with code 525, 511 527 or
512 and 809, 800 or 801 (NTG2.5)
Model 463 with code EU1 (NTG2.5)
Reason for change Validity adapted
Complaint:
Different volume levels between AUX IN and radio or CD/DVD playback. During
audio playback from an external MP3 player via the AUX jack, the volume in the
vehicle is too quiet. When switching from the AUX source to radio or CD/DVD the
volume is too loud and must be turned down by the customer. Traffic
announcements are also too loud when an AUX audio source is active.
Cause:
The volume level of the MP3 player is too low.
Remedy:
Update the software in the head unit with DAS / Xentry Diagnostics.
Note:
As of the software releases listed below, the customer can choose between
"Standard" and "Boost Mode" in the "Volume" menu in the AUX application. In
vehicles with SA code 518 [Media interface (N125/1)], software 08.47 is required
in the media interface control unit (N125/1) for this new function. This
software update is launched automatically after the head unit software
update.
Model 204
In vehicles as of model year 2010 (SA code: 800; series production breakpoint
06/2009) an adjustment option for the AUX source is implemented in all head unit
versions.
^ Audio 20 as of software 09.12
^ COMAND APS as of software 09.09
This software is available for vehicles up to and including model year 2009
(SA code 809) as of telematics CD version 09/2009 (A204 827 71 59 USA).
Note:
The "Boost Mode" feature is not available in Audio 20 units with hardware
object numbers A 204 870 00 89 and A 204 870 02 89.
Model 212, 207
In vehicles as of model year 2011 (SA code: 801; series production breakpoint
06/2010) an adjustment option for the AUX source is implemented in the COMAND
APS.
This function is not available in the Audio 20.
^ COMAND APS as of software 10.20
This software is available for vehicles up to and including model year 2010
(SA code 800) as of telematics CD version 07/2010 (A 212 827 55 59).
-----------------------------------------------------Page
1-----------------------------------------------------
2010 Mercedes
Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)
Model 245, 171, 230, 211, 219, 164, 251, 463, 203.7
In vehicles as of model year 2010 (SA code: 800; series production breakpoint
06/2009) an adjustment option for the AUX source is implemented in
the COMAND APS. This function is not available in the Audio 20.
^ COMAND APS as of software 09.02
This software is available for vehicles up to and including model year 2009
(SA code 809) as of telematics CD version 06/2009 (A1 71 827 40 59).
Symptoms
Work units
-----------------------------------------------------Page
2-----------------------------------------------------
Mercedes-Benz, Luxury Automobiles, German Engineering, Premium Car Brand, Mercedes Innovation
Saturday, February 13, 2016
Audio/COMAND(R) - Volume In AUX Menu Is Erratic Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)
Subscribe to:
Post Comments (Atom)
Popular Posts
-
Part 1 No CAN message was received from control unit Engine management. Possible cause: Fault in CAN communication with control...
-
P179A77 The redundancy system for DIRECT SELECT has a malfunction. The commanded position cannot be reached. Possible cause: A80 (Inte...
-
P2505 Relay 'Circuit 87' ( Engine ) (P2505) Possible cause: N3/10 (MESFI [ME] control unit) K40/4kK (Engine electronics an...
-
Are you a gangster? It seems unlikely. They don鈥檛 subscribe to weekly car magazines, or if they do, they don鈥檛 enter into much correspondenc...
-
2010 Mercedes Benz Truck GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) Vehicle: All Technical Service Bulletins Engine - Traces Of ...
-
2010 Cadillac CTS Sedan AWD V6-3.6L Page 71 瀚慖f not the specified value, test the circuit for a short to ground. If the circuit tests normal...
-
Charging a Tesla battery from 0% to 100% depends on the charger type, battery size, and conditions , but here’s a detailed breakdown: 🔋 C...
-
Misfiring of cylinder 5 : Damages TWC (P0305) Misfiring of cylinder 5 : Damages TWC (P0305) Possible cause: Combustion misfirings Aff...
-
When Acura unveiled the new TSX to the public it became the car maker's second model, after the RL, to be criticized for the controversi...
Popular Posts
-
P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 A...
-
P2505 Relay 'Circuit 87' ( Engine ) (P2505) Possible cause: N3/10 (MESFI [ME] control unit) K40/4kK (Engine electronics an...
-
C426 Start enable 'Drive authorization system' not issued. Possible cause: Engine management Affected functions: ...
-
Misfiring of cylinder 4 : Damages TWC (P0304) Misfiring of cylinder 4 : Damages TWC (P0304) Possible cause: Combustion misfirings Aff...
-
Part 1 One or more messages from control unit N80 (Steering column module) are not available on the CAN bus. Possible cause: Ch...
-
2010 Mercedes Benz Truck GL 350 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) Vehicle: All Technical Service Bulletins COMAND(R) - 'Dr...
-
2010 Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985) Vehicle: Customer Interest ABS/TCS - ABS Lamp ON/Codes 5603/5410 Set Y...
-
P179A77 The redundancy system for DIRECT SELECT has a malfunction. The commanded position cannot be reached. Possible cause: A80 (Inte...
-
D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil ...
-
P0108 B28 (Pressure sensor) : Short circuit to positive or open circuit (P0108) Possible cause: B28 (Pressure sensor) Affected functi...
Popular Posts
-
P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 A...
-
D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil ...
-
BMW (Benz-Wesbach) is a well-known and respected luxury brand in the European automotive market, particularly for sports cars like the M5. ...
-
Vehicle: All Technical Service Bulletins Diesel Engine - Crackling/Ticking Noise At Idle Engine makes intermittent knocking noise, ticking...
-
P179A77 The redundancy system for DIRECT SELECT has a malfunction. The commanded position cannot be reached. Possible cause: A80 (Inte...
-
Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts Technical Service Bulletin # LI83-30_P-05363...
-
Okay, so I need to figure out the financial results for Tesla's second quarter of 2025 based on the information provided. Let me start...
No comments:
Post a Comment