E1934
No CAN message was received from control unit Engine management.
Possible cause:
- Fault in CAN communication with control unit Motor electronics.
- Drive train CAN bus
Affected functions:
- CAN Communication
- Drive position selection
-------------------------------------------------
Test 1: Check the CAN communication with control unit N3/10 (ME-SFI [ME] control unit). Test 2: Drive train CAN test
Check the CAN communication with control unit N3/10 (ME-SFI [ME] control unit). Warning!Communication with ECU required.
Drive train CAN test Warning!Communication with ECU required.
No comments:
Post a Comment