Computers/Controls - Cannot Deactivate DRL Using Progman

Computers/Controls - Cannot Deactivate DRL Using Progman

June 2006

Technical Service

SI M09 03 06

2002-2006 Mini Cooper (R50) L4-1.6L (W10) Page 221

Programming/Coding Explanations

SUBJECT

No Daytime Running Lights Available in CKM

MODEL

R50, R52, R53

SITUATION

Daytime Running Lights cannot be deactivated using Progman

CAUSE

The selection is missing in Progman

PROCEDURE

Load modified ZCS code (Central Coding Code) to the vehicle using Progman

To modify the ZCS code or to reload an existing ZCS code, the appropriate ZCS code must be loaded to an empty floppy disk or CD. The file is

supplied by e-mail from the Technical Hotline. Please make a request using the PUMA system. A return e-mail address must be provided.

1. Connect the vehicle to an approved battery charger.

2. Insert the disk/CD into the floppy or DVD drive.

3. With the appropriate diagnostic head connected to the vehicle, start a Progman session.

4. Select the appropriate vehicle model.

5. Press the "Vehicle" button at the screen with the text "Program SELECTION: 1. Terminate CIP 2. Load software 3. Car & Key Memory

(CKM) ... ".

6. Press "Vehicle order".

7. Press "Adapt VO" and follow the on-screen instructions.

After adapting the ZCS code encode the BC1.

WARRANTY INFORMATION

Normally, the setting of CKM is included in the PDI time paid. Additional changes after that point are the customer's responsibility.

The current Progman version does not permit the daytime running lights setting to be changed.

The process described in this SI will not be necessary once the next version of Progman V22.00.00 becomes available.

In the interim, should a customer request a change to the daytime running lights setting, BMW will pay 2 FRUs for vehicles covered under the MINI

New Vehicle Warranty to perform the steps described under "procedure."

Defect Code Refer to KSD

Labor Operation: 63 99 000 WT

Labor Allowance: 2 FRU