2010 Cadillac Truck SRX FWD V6-3.0L Page 850

2010 Cadillac Truck SRX FWD V6-3.0L Page 850

- Left Rear Acceleration Sensor Circuit High Voltage/Open

DTC C0605 0A

- Left Rear Acceleration Sensor Circuit Too Slow Transitions

Diagnostic Fault Information

Circuit/System Description

The suspension control module supplies a 5 V reference voltage and a low reference to each body acceleration sensor. The body acceleration

sensors supply a signal of 0.5-4.5 V to the suspension control module.

Conditions for Running the DTC

System voltage is between 9-16 V

Conditions for Setting the DTC

C0595 02, C0600 02, and C0605 02

The signal voltage is less than 0.5 V for 1.5 s

C0595 05, C0600 05, and C0605 05

The signal voltage is greater than 4.5 V for 1.5 s

C0595 0A, C0600 0A, and C0605 0A

* The number of signal changes is less than specified value for 2.5 s.

* Vehicle speed is greater than 30 km/h (19 MPH)

Action Taken When the DTC Sets

* The electronic suspension control is disabled for the duration of the ignition cycle.

* The driver information center displays the SERVICE SUSPENSION SYSTEM message.

Conditions for Clearing the DTC

* A present DTC will clear on the next consecutive malfunction-free ignition cycle.

* A history DTC will clear after 41 consecutive malfunction-free ignition cycles.

Reference Information

Schematic Reference

Electronic Suspension Control Schematics (See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic

)/Diagrams/Electrical Diagrams)

Connector End View Reference

Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

Description and Operation