2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 1768

2010 Cadillac Truck Escalade/ESV RWD V8-6.2L Page 1768

P0117

* The engine is running for greater than 10 s.

OR

* The ignition is ON when the intake air temperature (IAT) is less than 50掳C (122掳F).

* This DTC runs continuously when the above conditions are met.

P0118

* The engine is running for greater than 10 s.

OR

* The ignition is ON when the IAT is greater than 0掳C (32掳F).

* This DTC runs continuously when the above conditions are met.

Conditions for Setting the DTC

P0117

The ECM detects that the ECT is warmer than 150掳C (302掳F) for greater than 5 s.

P0118

The ECM detects that the ECT is colder than -60掳C (-76掳F) for greater than 5 s.

Action Taken When the DTC Sets

DTCs P0117 and P0118 are Type B DTCs.

Conditions for Clearing the MIL/DTC

DTCs P0117 and P0118 are Type B DTCs.

Reference Information

Schematic Reference

Engine Controls Schematics (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)

Connector End View Reference

Component Connector End Views (See: Diagrams/Connector Views)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

Repairs/Wiring Repairs)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code

(DTC) Type Definitions)

Scan Tool Reference

Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information

Circuit/System Verification

Warning

Under pressure, the temperature of the solution in the radiator can be considerably higher, without boiling. Removing the radiator cap while the

engine is hot (pressure is high), will cause the solution to boil instantaneously, with explosive force. The solution will spew out over the engine,

fenders, and the person removing the cap. Serious bodily injury may result. Flammable antifreeze, such as alcohol, is not recommended for use at

any time. Flammable antifreeze could cause a serious fire.

1. Turn OFF the ignition.

2. Inspect the cooling system surge tank for the proper engine coolant level. Refer to Cooling System Leak Testing (See: Engine, Cooling and

Exhaust/Cooling System/Testing and Inspection/Component Tests and General Diagnostics) and Cooling System Draining and Filling (Static

Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Cooling System Draining and Filling (Static Fill)).