Skip to main content

2020 -2010 Mercedes Benz Truck G 550 Technical Service Bulletin # LI58-40_P-048775 Date: 100107

2020 -2010 Mercedes Benz Truck G 550 Technical Service Bulletin # LI58-40_P-048775 Date: 100107



Computers/Controls - DAS/XD Add-On 2009-11-27-1321



DAS/XD ADD-ON 2009-11-27-1321 FOR PASSENGER CARS



Topic number LI58.40-P-048775



Version 1



Design group 58.40 Workshop equipment/MB testers



Date 01-07-2010



Validity DVD version 11/2009



Reason for change



2010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963) 164



Reason for block



Complaint:



ME9.7



Model series: all except 168, 169, 245 and smart



Engine warning lamp is currently on or was on according to customer, and a delay fault of the camshaft adjuster is current or stored in the engine



control unit.



CDI D



Model series: 204



Fault memory cannot be erased



ETC



Model series: 203, 211, 221



Diagnosis as per factory specifications is possible without a password.



ETC



Model series: 204, 212, 207



1. Display of adaptation data for development department as text file



2. Activation of control unit 3. Correction programming in Diagpass and XD modified for hotline cases



CDID



Model series: 204



Actuations faulty and some cannot be performed.



Cause:



For all complaints: XD and DAS diagnostic data.



Remedy:



DAS/XD add-on 2009-11-27-1321 for passenger cars:



This add-on can be installed over DAS/XD version 11/2009.



This add-on does not supersede any other add-ons and must be additionally installed.



Symptoms



2010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963) 165



Control unit/fault code



Validity



2010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963) 166

Comments

Post a Comment

Popular posts from this blog

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.

P179D The redundancy system for DIRECT SELECT was activated. There is a signal above the permissible limit value.2010 Mercedes Benz E 63 AMG Sedan (212.077) V8­6.3L (156.985) Copyright ? 2013, ALLDATA 10.52SS Page 978 Possible cause: ­ A80 (Intelligent servo module for DIRECT SELECT) Affected functions: ­ Drive position selection ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­ Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' 1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)' Operation number of operation texts and work units or standard texts and flat rates:27­0641Possible cause and remedy ­ Internal fault in control unit ­ Replace component A80 (Intelligent servo module for DIRECT SELECT). Additional measures ­ ­ Perform initial startup. Continue with button "F2" Initial startup The following procedure will guide you through all steps requ...
Read more

Dremel 4300-9/64 Versatile Corded Rotary Tool Kit with Flex Shaft and Hard Storage Case, High Power & Performance, Variable Speed- Engraver, Etcher, Sander, and Polisher, Ultimate Gift for the DIYER

  The Dremel 4300-9/64 is a versatile corded rotary tool kit designed for a wide range of applications, making it an excellent choice for DIY enthusiasts and professionals alike. Here’s an overview of its key features: ### Key Features 1. **Power and Performance**:    - **High Power Motor**: The 4300 features a powerful motor that provides efficient performance for various tasks, including engraving, etching, sanding, and polishing. 2. **Variable Speed**:    - **Adjustable RPM**: Offers a variable speed range (typically 5,000 to 35,000 RPM) for precise control, allowing you to match the speed to the material and task at hand. 3. **Flex Shaft Attachment**:    - **Enhanced Maneuverability**: The included flex shaft allows for more intricate work in tight spaces and provides a comfortable grip for detailed projects. 4. **Comprehensive Accessory Kit**:    - **Versatile Attachments**: Comes with a variety of attachments and accessories, including ...
Post a Comment
Read more

D138， Diagnostic Trouble Codes ( DTC ): Manufacturer Code Charts

D138 The message from the auxiliary oil pump is not available on the CAN bus. Possible cause: M42 (Electric transmission oil pump) / N89 (Transmission oil additional pump control unit) Affected functions: Engine start ------------------------------------------------- Test 1: Check component M42 (Electric transmission oil pump). Check component M42 (Electric transmission oil pump). Operation number of operation texts and work units or standard texts and flat rates:27-0641Test prerequisite Battery voltage is OK. Test sequence Switch off ignition. Disconnect connector at component N89 (Transmission oil additional pump control unit). Use multimeter to check voltage directly at jacks of wiring harness for component N89 (Transmission oil additional pump control unit). Switch on ignition. Measure direct voltage with multimeter between 1 and 4Specified value - Voltage [8,5...16,4] V Question Is the measurement value OK?...
Post a Comment
Read more