2010 Land Rover Range Rover (LM) V8-5.0L Technical Service Bulletin # TECLTB00372 Date: 110406
Brakes - Judder/Vibration Upon Application
No: LTB00372 (Issue 1)
06 APR 2011
SECTION: 206
Brake Judder / Vibration
AFFECTED VEHICLE RANGE:
Range Rover (LM) 5.0L naturally aspirated only VIN: AA304426 - Onwards
Model Year: 2010 - Onwards
CONDITION SUMMARY:
Situation: The brakes may judder / vibrate when applied. This may be caused by the front brake pad material.
NOTE:
Brake linings, brake discs, and any other friction-related components are not covered when due to wear and tear but are covered for manufacturing,
material defects, or the failure of another warranted part during the lifetime of the warranty. Refer to Warranty Policies and Procedures Manual for
further details.
Action: In the event of a customer concern of the above, refer to the Repair Procedure outlined below to replace the front brake discs and pads.
PARTS
TOOLS:
Refer to Workshop Manual for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
2010 Land Rover Range Rover (LM) V8-5.0L Page 74
REPAIR PROCEDURE
REPLACE FRONT BRAKE DISCS AND PADS
1. Refer to Workshop Manual, section 206-03: Front Brake Disc, and replace the front brake discs and pads.
No comments:
Post a Comment