Tuesday, April 30, 2019

Disclaimer2010 Land Rover Range Rover Sport (LS) V8-5.0L Technical Service Bulletin # TECLTB003192 Date: 120125

Disclaimer2010 Land Rover Range Rover Sport (LS) V8-5.0L Technical Service Bulletin # TECLTB003192 Date: 120125



Body - Exterior A-Pillar Mouldings Loose



2010 Land Rover Range Rover Sport (LS) V8-5.0L Page 52



LTB00319NAS2



25 JAN 2012



ISSUE '2' CHANGES ARE HIGHLIGHTED IN GRAY



SECTION: 501



Exterior A-Pillar Molding Loose



AFFECTED VEHICLE RANGE:



CONDITION SUMMARY:



Situation:



The exterior A-pillar molding may become loose. This may be caused by the molding's retaining clips losing tension.



Action:



In the event of a customer concern of the above, refer to the Repair Procedure outlined below to install new A-pillar molding retaining clips.



PARTS:



TOOLS:



Refer to Workshop Manual for any required special tools



WARRANTY:



NOTE:



Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.



Always refer to DDW to obtain the latest repair time.



DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.



Normal Warranty policies and procedures apply



REPAIR PROCEDURE



INSTALL A-PILLAR RETAINING CLIPS



1. Refer to Workshop Manual, section 501-08: Exterior Trim and Ornamentation, and install the new A-pillar retaining clips to the A-pillar

No comments:

Post a Comment