Paint - Environmental/Industrial Fallout Repair
SI B 99 01 08
Paint Work
September 2008
Aftersales
SUBJECT
Environmental Paint Damage Repair
MODEL
All
2002-2006 Mini Cooper (R50) L4-1.6L (W10) Page 296
SITUATION
Environmental issues can damage painted surfaces. Issues such as acid rain, industrial fallout, rail dust, bird droppings, and bugs can all damage the
paint surface. Repair processes are in place to repair
damage caused by these issues.
Industrial fallout or rail dust issues typically occur when new vehicles have been transported by rail to a location, or when a vehicle is located near
rail tracks for an extended period of time. Rail dust is comprised of heated iron particles from train brakes that, when airborne, will land on the
horizontal surfaces of vehicles and imbed themselves into the paint surface.
Typical sanding and polishing techniques alone will not resolve the issue of rail dust. BMW, in cooperation with 3M, has developed a procedure for
removing and correcting rail dust damage for the paint surface of a vehicle. Below are the process and product for removing and correcting rail dust
damage.
PROCEDURE
The process below is for the removal of contamination and minor paint surface defects resulting from transportation and storage of new vehicles.
Please be sure to use only BMW approved products when attempting to make a repair to the paint surface!
1. Wash and rinse the vehicle thoroughly, using BMW approved car wash soap*.
2. Check exterior surfaces for contaminants a rough or gritty feel, or use a white terry cloth towel to see if you get small snags of material on the
surface.
3. Work contaminated areas with a 3M clay bar, using light pressure and car wash soap or 3Mtrade; Gloss Enhancer as a lubricant.
4. Rinse and dry the surface.
5. Knead the clay periodically to expose a new surface.
6. Polish the surface, using BMW approved polishing materials and techniques
Note:
Refer to the BMW Color system manual for approved polishing materials and proper techniques.
* Please see page two for a list of BMW approved materials.
PARTS INFORMATION
The following materials are approved by BMW for the removal of rail dust and for the repair of the paint surface:
^ 3M(TM) 200 gram clay bar - PN 38070
^ 3M(TM) Finesse-Ittrade; SRC Finishing Material - PN 05927
^ 3M(TM) Wool Pad - PN 05703 or 05719
^ 3M(TM) Detailing Cloth - PN 06016
^ 3M(TM) Black Foam Pad - PN 05725 or 05738
^ 3M(TM) Perfect-It 3000trade; Ultrafin SE - PN 06068
^ 3M(TM) Yellow Wool Pad - PN 05713
^ 3M(TM) Perfect-It trade; Foam Polishing Pad Glaze - PN 05996
^ 3M(TM) Black Foam Pad - PN 05729
^ 3M(TM) Car Wash Soap - PN 39000
^ 3M(TM) Detailing Cloth - PN 06017
^ BMW Car Wash Soap - 83 12 0 412 530
^ BMW Polishing Cloth - 83 12 0 411 891
For product safety and health information, please see the Material Safety Data Sheet (MSDS 08-5407-5), or contact:
3M Automotive Aftermarket Division
3M Center, Bldg. 223-6N-01
2002-2006 Mini Cooper (R50) L4-1.6L (W10) Page 297
St. Paul, MN 55144-1000
No comments:
Post a Comment