Fuel System - Fuel Level Sender Replacement Information
SI M16 01 09
Fuel Supply Systems
February 2012
Technical Service
This Service Information bulletin supersedes SI M16 01 09 dated August 2009.
[NEW] designates changes to this revision
SUBJECT
Fuel Level Sensor Repair Procedure
MODEL
[NEW] All
[NEW] INFORMATION
When replacing the right and/or left side fuel level sensor due to a failure, it is not necessary to replace the following complete assemblies/kits:
^ The fuel pump with fuel level sensor (right side); and/or
^ The fuel filter with fuel level sensor (left side).
For example, the customer complains that the fuel gauge is inoperative. When diagnosed, the problem is a defective fuel level sensor. As listed in
ETK, only replace the assembly's fuel level sensor component part.
When applicable the "fuel pump repair kit" or "fuel filter repair kit" with level sensor must not be used to repair fuel level sensor concerns.
[NEW] WARRANTY INFORMATION
Claims for replacing complete assemblies or kits when the component part is available separately will not be accepted.
No comments:
Post a Comment