Mercedes Benz C 300 4MATIC # LI58-40_P-048776 Date: 100107
Computers/Controls - DAS/XD Add-On 2009-12-03-1314
DAS/XD ADD-ON 2009-12-03-1314 FOR PASSENGER CARS
Topic number LI58.40-P-048776
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 01-07-2010
Validity DVD version 10/2009
Reason for change
Reason for block
Complaint:
ETC, model series: 203,211,221 Diagnosis as per factory specifications is possible without a password.
ETC
Model series: 204, 212, 207
1. Display of adaptation data for development department as text file
2. Activation of control unit 3. Correction programming in Diagpass and XD modified for hotline cases
SIM4CNG
Model series: 211
Coding of engine control unit not possible.
TSGVL9, TSGVR9, TSGHL9, TSGHR9, TSGML9, TSGMR9
Model series: 221
Coding in diagnosis per factory specifications is not possible
SRS/airbag
Model series: X204
If the SM for the X204 cannot be successfully completed in the first run (e.g. communication problem, OBD connector disconnected etc.), it is not
possible to repeat the initial startup procedure (fault message -99 after CU programming).
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-12-03-1314 for passenger cars:
This add-on can be installed over DAS/XD version 10/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
319
Control unit/fault code
320
Validity
Computers/Controls - DAS/XD Add-On 2009-12-03-1314
DAS/XD ADD-ON 2009-12-03-1314 FOR PASSENGER CARS
Topic number LI58.40-P-048776
Version 1
Design group 58.40 Workshop equipment/MB testers
Date 01-07-2010
Validity DVD version 10/2009
Reason for change
Reason for block
Complaint:
ETC, model series: 203,211,221 Diagnosis as per factory specifications is possible without a password.
ETC
Model series: 204, 212, 207
1. Display of adaptation data for development department as text file
2. Activation of control unit 3. Correction programming in Diagpass and XD modified for hotline cases
SIM4CNG
Model series: 211
Coding of engine control unit not possible.
TSGVL9, TSGVR9, TSGHL9, TSGHR9, TSGML9, TSGMR9
Model series: 221
Coding in diagnosis per factory specifications is not possible
SRS/airbag
Model series: X204
If the SM for the X204 cannot be successfully completed in the first run (e.g. communication problem, OBD connector disconnected etc.), it is not
possible to repeat the initial startup procedure (fault message -99 after CU programming).
Cause:
For all complaints: XD and DAS diagnostic data.
Remedy:
DAS/XD add-on 2009-12-03-1314 for passenger cars:
This add-on can be installed over DAS/XD version 10/2009.
This add-on does not supersede any other add-ons and must be additionally installed.
Symptoms
319
Control unit/fault code
320
Validity
