2010 Mercedes Benz Truck G 550 (463.236) V8-5.5L (273.963) Steering - Cracking Noise When Turning Steering
WheelCracking noise when turning steering wheel
Vehicle: All Technical Service Bulletins
Steering - Cracking Noise When Turning Steering Wheel
Cracking noise when turning steering wheel
Topic number LI31.30-P-046856
Version 1
Design group 31.30 Frame, lateral underride guard
Date 06-07-2012
Validity MODEL 460, 461, 463
Reason for change
Complaint:
Noise when turning steering wheel
Cause:
Relative motion between the frame and the welded-in mounting plate. The friction can be felt by feeling the longitudinal frame member when turning
the steering wheel while stationary.
Remedy:
This complaint is no grounds for replacing the steering.
1. Remove collision guard.
2. Insert steel strip into frame opening and push in as far as mounting plate.
Diagram. Use steel strip of dimensions: 6x20x1200 mm (rolled).
3. Separate assembly plate from frame panel with a firm blow with a hammer.
A distance of approx. 1 mm is sufficient.
4. Preserve the cavity created.
Go as far as the contact point of the inserted steel strip.
5. Install collision guard.
Attachments
Symptoms
WORK UNITS
ATTACHMENT
Arrow Frame Opening Insert Steel strip as far as mounting plate.
-----------------------------------------------------Page 1-----------------------------------------------------
