2010 Cadillac CTS Sedan AWD V6-3.6L Page 710
Conditions for Clearing the DTC
* The electric parking brake module clears the history DTC when a current DTC is not detected in 40 ignition cycles.
* The condition for the DTC is no longer present.
* The electric parking brake switch button is released using the scan tool.
Diagnostic Aid
Check if the electric parking brake switch is stuck in the apply or release position which may cause the DTC to set.
Reference Information
Schematic Reference
Park Brake System Schematics (See: Brakes and Traction Control/Parking Brake System/Diagrams/Electrical Diagrams)
Connector End View Reference
Component Connector End Views (See: Diagrams/Connector Views)
Description and Operation
Electronic Parking Brake Control Module Description (See: Brakes and Traction Control/Parking Brake System/Parking Brake Control
Module/Description and Operation)
Electrical Information Reference
* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit Testing/Circuit Testing)
* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Connector Repairs/Connector Repairs)
* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/Circuit
Testing/Testing for Intermittent Conditions and Poor Connections)
* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/Wiring Repairs/Wiring Repairs)
Scan Tool Reference
Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information
Circuit/System Verification
1. Verify DTC C0293 is not set.
瀚慖f DTC C0293 is set, refer to DTC C0293 (See: C Code Charts/C0293).
2. Command the Park Brake Switch to Released with a scan tool. The BRAKE light should turn off and the Park Brake Status on the scan tool
should display Released.
瀚慖f the BRAKE light does not turn off or the Park Brake Status does not display Released replace the S91 Electric Parking Brake Switch.
Repair Instructions
Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.
Parking Brake Switch Replacement (See: Brakes and Traction Control/Parking Brake System/Parking Brake Warning Switch/Service and
Repair/Parking Brake Switch Replacement)
C0394
DTC C0394
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptor
DTC C0394 00
- Rear Axle Coupling Temperature Sensor Circuit
No comments:
Post a Comment