2010 Cadillac Truck Escalade RWD V8-6.2L Page 1217

2010 Cadillac Truck Escalade RWD V8-6.2L Page 1217

Reference Information

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code

(DTC) Type Definitions)

Circuit/System Verification

1. Clear the DTC information.

2. Ignition OFF for 1 minute.

3. Ignition ON.

4. Retest for DTCs P0BE6, P0BE7, P0BE8, P0BEA, P0BEB, P0BEC, P0BEE, P0BEF, P0BF0, P0BF2, P0BF3, P0BF4, P0BF6, P0BF7,

P0BF8, P0BFA, P0BFB or P0BFC.

Circuit/System Testing

Program the PIM with the latest software version and recheck for DTCs.

If the DTC resets after programming or if the PIM already contains the latest software version, replace the PIM.

Repair Instructions

Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.

Control Module References (See: Testing and Inspection/Programming and Relearning) for PIM replacement, setup, and programming.

P0BF8

DTC P0BE6-P0BE8, P0BEA-P0BEC, P0BEE, P0BEF, P0BF0, P0BF2-P0BF4, P0BF6-P0BF8, or P0BFA-P0BFC

Diagnostic Instructions

* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System

Check - Vehicle) prior to using this diagnostic procedure.

* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an

overview of the diagnostic approach.

* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure

Instructions) provides an overview of each diagnostic category.

DTC Descriptor

DTC P0BE6

- Drive Motor 1 Phase U Current Sensor Performance

DTC P0BE7

- Drive Motor 1 Phase U Current Sensor Circuit Low Voltage

DTC P0BE8

- Drive Motor 1 Phase U Current Sensor Circuit High Voltage

DTC P0BEA

- Drive Motor 1 Phase V Current Sensor Performance

DTC P0BEB

- Drive Motor 1 Phase V Current Sensor Circuit Low Voltage

DTC P0BEC

- Drive Motor 1 Phase V Current Sensor Circuit High Voltage

DTC P0BEE

- Drive Motor 1 Phase W Current Sensor Performance

DTC P0BEF

- Drive Motor 1 Phase W Current Sensor Circuit Low Voltage

DTC P0BF0

- Drive Motor 1 Phase W Current Sensor Circuit High Voltage