Saturday, December 21, 2019

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 1438


- Engine running



-------------------------------------------------



Test 1: Camshaft adjuster



1. Camshaft adjuster



Camshaft adjuster



Possible cause and remedy



- Process other fault codes first of all.



- Perform function 'Sensor rotor adaptation' in control unit ME-SFI under menu 'Learning processes'.



- Check timing.



- Camshaft adjuster: FAULTY



End of test



2389



The position of the intake camshaft (cylinder bank 2) deviates from the specified value in direction 'Retarded' during cold start.



Possible cause:



- Camshaft adjuster



Affected functions:



- Engine running



-------------------------------------------------



Test 1: Camshaft adjuster



1. Camshaft adjuster



Camshaft adjuster



Possible cause and remedy



- Process other fault codes first of all.



- Perform function 'Sensor rotor adaptation' in control unit ME-SFI under menu 'Learning processes'.



- Check timing.



- Camshaft adjuster: FAULTY



End of test



2711



Hydraulic fault in transmission (engaging shift element does not engage).



Possible cause:



- Mechanical or hydraulic defect in the transmission



Affected functions:



- Automatic transmission Function



-------------------------------------------------



Test 1: Remedial action if hydraulic clutch in automatic transmission fails to cut in



1. Remedial action if hydraulic clutch in automatic transmission fails to cut in



Operation number of operation texts and work units or standard texts and flat rates:27-0641Remedy



- Check and, if necessary, correct oil level of automatic transmission.



Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27401 B1 END OF TEST

No comments:

Post a Comment