Disclaimer2010 Land Rover LR4 (LA) V6-4.0L Technical Service Bulletin # TECLTB00253 Date: 100127

Disclaimer2010 Land Rover LR4 (LA) V6-4.0L Technical Service Bulletin # TECLTB00253 Date: 100127

A/T - 'Transmission Fault' Message'/DTC P0826-62

No.: LTB00253

Issue: 1

Date: 27 JAN 2020

SECTION: 307

"Transmission Fault" Displayed with DTC P0826-62 Stored

AFFECTED VEHICLE RANGE:

CONDITION SUMMARY:

Situation:

The instrument cluster message center may display Transmission Fault and the paddle shift controls may be inoperative along with Diagnostic

Trouble Code (DTC) P0826-62 stored in the Transmission Control Module CFCM). This may be caused by the TCM receiving a Sport / Manual

signal from the transmission gear selector mechanism while the shift lever is still in the Park (P) position, usually occurring when the ignition is

switched ON or during engine start-up.

Action:

In the event of a customer concern of the above, refer to the Repair Procedure outlined below to replace the transmission gear selector lever

assembly.

2010 Land Rover LR4 (LA) V6-4.0L Page 128

PARTS:

TOOLS:

Refer to Workshop Manual (GTR) for any required special tools

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only.

Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

REPLACE TRANSMISSION GEAR SELECTOR LEVER ASSEMBLY

NOTE:

Global Technical Reference (GTR) lookup sequence is as follows:

GTR Home > NAS > Model > Service Information > Model Year

1. Refer to Workshop Manual (GTR) section 304-05A and replace the transmission gear selector lever assembly.