Mercedes-Benz Mercedes Benz OEM Parts Mercedes Benz OE Replacement Parts
Technical Service Bulletin # LI83-10_P-048662 Date: 100105
Body - Water Deflector Below Windshield Detached
WATER DEFLECTOR PROTRUDES
Topic number LI83.10-P-048662
Version 1
Design group 83.10 Ventilation
Date 01-05-2010
Validity Model W/S 212
Affected time period: From A 057 734 to A 154 303
Reason for change
Reason for block
Complaint:
The water deflector below the windshield can become detached and protrude in places.
Cause:
Tolerance shifts in the sectional molding below the windshield and water deflector.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 214
Remedy:
In the case of complaints, unscrew the water deflector in the detached area only
Place an assembly wedge (Figure 1) between sectional molding and water deflector, and twist the wedge at regular intervals to press small
notches/waves in the sectional molding. (See red arrows)
This produces a higher clamping force when installing.
Assembly:
Carefully press water deflector into sectional molding
(do not knock/tap as there is a risk of cracking the windshield!)
The water deflector is correctly installed when it protrudes from the windshield rubber seal by max. 1 mm. (Figure 2)
Screw water deflector back down.
Attachments
Symptoms
Validity
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 215
Attachment - Sectional molding with notches/waves (See red arrows)
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 216
Attachment - Water deflector correctly installed
Technical Service Bulletin # LI83-10_P-048662 Date: 100105
Body - Water Deflector Below Windshield Detached
WATER DEFLECTOR PROTRUDES
Topic number LI83.10-P-048662
Version 1
Design group 83.10 Ventilation
Date 01-05-2010
Validity Model W/S 212
Affected time period: From A 057 734 to A 154 303
Reason for change
Reason for block
Complaint:
The water deflector below the windshield can become detached and protrude in places.
Cause:
Tolerance shifts in the sectional molding below the windshield and water deflector.
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 214
Remedy:
In the case of complaints, unscrew the water deflector in the detached area only
Place an assembly wedge (Figure 1) between sectional molding and water deflector, and twist the wedge at regular intervals to press small
notches/waves in the sectional molding. (See red arrows)
This produces a higher clamping force when installing.
Assembly:
Carefully press water deflector into sectional molding
(do not knock/tap as there is a risk of cracking the windshield!)
The water deflector is correctly installed when it protrudes from the windshield rubber seal by max. 1 mm. (Figure 2)
Screw water deflector back down.
Attachments
Symptoms
Validity
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 215
Attachment - Sectional molding with notches/waves (See red arrows)
2010 Mercedes Benz E 550 Sedan (212.072) V8-5.5L (273.971) Page 216
Attachment - Water deflector correctly installed
