Saturday, February 13, 2016

Instruments - Navigation Instructions NOT Displayed Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)

2010 Mercedes Benz C 63 AMG Sedan (204.077) V8-6.3L (156.985)

Vehicle: Customer Interest

Instruments - Navigation Instructions NOT Displayed

NAVIGATION 20: NO NAVIGATION INSTRUCTIONS IN INSTRUMENT CLUSTER

Topic number LI82.85-P-047461

Version 2

Design group 82.85 Navigation and communication systems (CNS, ICS, COMAND, FleetBoard)

Date 12-08-2009

Validity Model 204 with Audio 20 (code 510 or 523) and comfort multifunction leather steering wheel (code 442) or styling and equipm

Reason for change Title revised, document adapted to new naming designation of Navigation 20

Reason for block

Complaint:

After installation of the "Navigation 20" retrofit solution for navigation available from Mercedes-Benz Accessories (MBA), navigation instructions

do not appear in the instrument cluster (A1).

Cause:

Navigation menu not enabled in instrument cluster (A1) when the retrofit was performed.

Remedy:

Code "Navigation 20" in instrument cluster (A1) using DAS version 06/09 or higher.

In menu "Instrument cluster" > "Control unit adaptations > "Customer-specific settings" > "Universal Media Interface", set to "INSTALLED".

After the correct coding has been carried out, activate the navigation menus by: press (& hold for 3+ seconds) the CLEAR (C) button next to the

central controller.

Note:

This is part of the retrofit procedure and must not be billed through warranty or goodwill channels.

Symptoms

Work Units

Validity


-----------------------------------------------------Page 1-----------------------------------------------------

No comments:

Post a Comment