Saturday, September 14, 2019

2010 Mercedes Benz C 300 (204.054) V6-3.0L (272.947) Page 894


- Refill oil in automatic transmission up to maximum oil level mark at oil temperature of 80锟斤拷 C.



- (Refer to repair instructions: automatic transmission 722.9)



Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 27 001 75Continue with button "F2"



Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)



Additional measures



- Erase fault memory in control unit Y3/8n4 (Fully integrated transmission control (VGS) control unit)



NOTE



- The fault memory is erased by pressing button "F2".



Continue with button "F2"



Warning!Communication with ECU required.



0741



Actuation of torque converter lockup clutch is not possible.



Possible cause:



- Torque converter lockup clutch



Affected functions:



- Automatic transmission Function



-------------------------------------------------



Test 1: Remedial action on impermissible closing or excessively high friction power of the torque converter lockup clutch



1. Remedial action on impermissible closing or excessively high friction power of the torque converter lockup clutch



Operation number of operation texts and work units or standard texts and flat rates:27-0641Question:Does a customer complaint exist?



YES



Requirement:A customer complaint exists.Possible cause



- The software version of control unit EGS electronic transmission control is too old.



Remedy



- Program control unit EGS electronic transmission control.



Notes on submitting warranty or goodwill claimsSEAG damage code (7 digits): 54553 90 Continue with button "F2"



Warning!Communication with ECU required.



NO



Requirement:No customer complaint exists.RemedyIgnore fault code and erase fault memory. End of test



0742



Engaging of torque converter lockup clutch not permitted.



Possible cause:



- Torque converter lockup clutch



Affected functions:



- Automatic transmission Function



-------------------------------------------------



Test 1: Remedial action on impermissible closing or excessively high friction power of the torque converter lockup clutch

No comments:

Post a Comment