BMW cars are very loved by their owners and for good reason. These cars provide everything a driver could wish for: safety, power, high-tech systems, the pleasure to drive and last but not least..the women love men who own BMW`s! If you don`t know what coding is or what it is used for then I will give you a starting point. You can avoid a trip to the dealer and diagnose your BMW through the OBD port and reset the errors your car might have. Maybe you want to install an option that your car didn`t have from the factory and you want to do it yourself? That can be easily done too! Maybe you want to install xenon on your car that has factory halogen without any errors? Do you want to disable the annoying seat belt beep? Do you want to disable your corner lights and give your car a European look?
Do you want your car to show you the real speed digitally on your dashboard? Want to retrofit a module on your car that requires programming by BMW after the install? You will be able to do this yourself and save a pretty penny. Auto High Beam Assistant activation? Disable auto Start Stop? This and much much more (almost anything) can be done through coding. How does BMW car Coding Work? There are several programs that let you enable or disable options on your car just like the dealer operates. Anyway when messing around with your car`s options be sure you know what you`re doing first. Tutorials come in handy and it`s the best way to learn because other people have tested almost anything and everything you can think of. If you find it confusing or don`t know what to look for just read below and you will find out where is the best place to find everything that is needed in order to get started.
BMW`s have plenty of options that haven`t been activated on purpose by the factory and they consider those as being extra options and charge you in order to get what you want activated. 1. You need to buy a cable that connects your laptop computer to your BMW`s OBD port. DCAN BMW coding cable (You will find many cables on Amazon or eBay, just make sure to ask the seller if the cable will be compatible to your car. It`s usually a white transparent cable. For Fx Series coding you need a ENET cable. You don`t have to buy the most expensive one, all ENET cables are the same so it`s simple to get the right cable. 2. You need the software and tutorials that will teach you step by step how to code options for your car. Coding software and tutorials to get you started could easily cost a few hundred bucks and it`s very hard to find a complete collection. The links we mentioned earlier will get you started coding the same day if you already have the cable.
The installation instructions are easy to follow and the tutorials are step by step so even if you are a newbie, you`ll do just fine! For F series cars the Software is called E-SYS and it needs a token in order to code certain modules. The token is provided also so you can start coding right away. That way you won`t need to worry about anything. In the video there are just a few options shown, there are many more mods possible, you just have to try them out, it`s pretty easy once you get used to it. Coding BMW`s is a fun process once you get the hang of it and you can discover new mods by yourself once you are sure what you`re doing. You can and it`s recommended to save the unaltered module files and then you can start to mess around with different options and parameters.
No comments:
Post a Comment