- Control unit programming was aborted.
- Control unit N3/10 (ME-SFI [ME] control unit) must be programmed again.
D601
Control unit software 'CODE' missing or is corrupt.
Possible cause:
- Control unit programming was not completed successfully.
Affected functions:
- Power generation
-------------------------------------------------
Test 1: Control unit software
1. Control unit software
Possible cause and remedy
- Control unit programming was aborted.
- Control unit N3/10 (ME-SFI [ME] control unit) must be programmed again.
D606
Control unit software 'DATA' missing or is corrupt.
Possible cause:
- Control unit programming was not completed successfully.
Affected functions:
- Power generation
-------------------------------------------------
Test 1: Control unit software
1. Control unit software
Possible cause and remedy
- Control unit programming was aborted.
- Control unit N3/10 (ME-SFI [ME] control unit) must be programmed again.
E0009
CAN signal 'Torque request' from control unit Air conditioning is implausible.
Possible cause:
- Control unit Air conditioning
Affected functions:
- Heating
- Engine running
-------------------------------------------------
Test 1: Check component N22 (AAC [KLA] control and operating unit).
1. Check component N22 (AAC [KLA] control and operating unit).
No comments:
Post a Comment