explosive, invisible and spread out at floor level, they are toxic if inhaled and produce giddiness and an anaesthetizing effect.Rules of conduct and
protective measures
- Wear suitable protective clothing.
- Pay attention to national safety precautions and regulations.
- No fire, sparks, naked flames and smoking.
- Ensure the work place is adequately ventilated.
- Never drain or pour in fuels over assembly pits.
- Store drained fuel in a suitable and sealed vessel.
- Immediately eliminate any fuel which has flowed out.
First-aid measures
- Clean moistened skin with water and soap.
- Change moistened clothing as quickly as possible.
- If fuel gets into your eyes, rinse out your eyes immediately with water and contact a doctor if necessary.
Test 2.1.1: Test actuation of component Y62y6 (Fuel injector cylinder 6).
Test 2.1.2: Test signal voltage of component Y62y6 (Fuel injector cylinder 6).
Test 2.1.3: Check internal resistance of component Y62y6 (Fuel injector cylinder 6).
Test 2.1.4: Inspect component Y62y6 (Fuel injector cylinder 6) for leaks.
Test 2.1.5: Inspect operation and spray pattern of component Y62y6 (Fuel injector cylinder 6).
2.1.1. Test actuation of component Y62y6 (Fuel injector cylinder 6).
Test prerequisite
- Coolant temperature > 80锟斤拷 C
- Engine RUNNING
Warning!Communication with ECU required.
2.1.2. Test signal voltage of component Y62y6 (Fuel injector cylinder 6).
Figure legend
- A -ConnectionTest cable 35-pin socket box
- 001 -Sockets of component N3/10 (ME-SFI [ME] control unit)
- 05 -35-pin socket box
- 050 -126-pin socket box
- 108 -Test cable 266 589 01 63 00
- N3/10 (ME-SFI [ME] control unit)
- II 1-63ConnectionTest cable
- III 64-126ConnectionTest cable
Warning!
- Connection A of test cable 108 may NOT be connected to connection B of the 126-pin socket box (050).
Continue to test with button F2
No comments:
Post a Comment