The measurement value is OK.End of test
NO
The measurement value is not OK.Possible cause and remedy
- Line from control unit N3/10 (ME-SFI [ME] control unit) to component B11/15 (PremAir sensor)
End of test
1.3. NoteThe PremAir sensor must be firmly latched and bonded to the PremAir radiator.
1.3. No further information available.
E2051
CAN signal 'Fuel tank level' from control unit A1 (Instrument cluster) is implausible.
Possible cause:
- A1 (Instrument cluster)
Affected functions:
- Fuel level indicator
-------------------------------------------------
Test 1: Check component A1 (Instrument cluster).
1. Check component A1 (Instrument cluster).
Read and process fault code from control module A1 (Instrument cluster).
Possible cause and remedy
- Read and process fault code from control module A1 (Instrument cluster).
End of test
E2073
This fault can be ignored and erased.
Possible cause:
- This fault can be ignored and erased.
Affected functions:
- CAN Communication
-------------------------------------------------
Test 1: This fault can be ignored and erased.
1. This fault can be ignored and erased.
Note:This fault can be ignored and erased.
E2077
This fault can be ignored and erased.
Possible cause:
- This fault can be ignored and erased.
Affected functions:
- CAN Communication
-------------------------------------------------
No comments:
Post a Comment