The fault code P179D indicates that the redundancy system for DIRECT SELECT was activated. This typically indicates a fault in the vehicle's transmission system.
The redundancy system for DIRECT SELECT is a safety feature that is designed to prevent the transmission from engaging a gear that could cause damage to the engine or transmission. When this system is activated, the vehicle may not be able to shift into certain gears or may be limited to a specific gear range.
To address this issue, you should take your vehicle to a certified mechanic or dealership for diagnosis and repair. Some possible causes of this fault code include:
Faulty transmission control module (TCM): The TCM is responsible for controlling the transmission and may be faulty, preventing it from sending the correct signals to the transmission.
Faulty transmission range sensor: The range sensor is responsible for sending the correct gear position information to the TCM. If the range sensor is faulty, it may cause the TCM to activate the redundancy system.
Faulty solenoids: The solenoids control the flow of fluid in the transmission and may be faulty, preventing the transmission from shifting correctly.
Low transmission fluid level: A low fluid level can cause a variety of transmission issues, including the activation of the redundancy system.
Wiring or electrical issues: Faulty wiring or electrical connections can cause issues with the TCM or range sensor and may trigger the redundancy system.
The exact cause of the fault code will need to be diagnosed by a qualified mechanic using specialized diagnostic equipment. Once the issue has been identified, the mechanic can recommend the appropriate repair or replacement.
The fault code P179D is related to a fault in the vehicle's transmission system, specifically the redundancy system for DIRECT SELECT. This is a safety feature that prevents the transmission from engaging a gear that could cause damage to the engine or transmission.
Since this issue is related to the transmission, it is recommended that you take your vehicle to a certified mechanic or dealership for diagnosis and repair. A professional mechanic will have the specialized diagnostic equipment necessary to properly diagnose the issue and recommend the appropriate repair or replacement.
The exact steps for repairing this fault code will depend on the specific cause of the issue, which will need to be diagnosed by a qualified mechanic. Some possible causes of the fault code include a faulty transmission control module, a faulty transmission range sensor, faulty solenoids, a low transmission fluid level, or wiring or electrical issues.
Once the mechanic has identified the cause of the fault, they will be able to recommend the appropriate repair or replacement. This could involve replacing or repairing the transmission control module, the range sensor, or the solenoids, as well as checking and refilling the transmission fluid level or repairing any wiring or electrical issues.
It is important to have this issue addressed promptly by a qualified mechanic, as driving with a faulty transmission can cause further damage to your vehicle and be dangerous on the road.
No comments:
Post a Comment