Friday, May 6, 2022

2010 Cadillac Truck SRX FWD V6-3.0L Page 825

2010 Cadillac Truck SRX FWD V6-3.0L Page 825



DTC C0450 04



- Steering Assist Control Solenoid Valve Circuit Open



DTC C0450 08



- Steering Assist Control Solenoid Valve Circuit Performance - Signal Invalid



DTC C0450 0B



- Steering Assist Control Solenoid Valve Circuit High Current



Diagnostic Fault Information



Circuit/System Description



The electronic brake control module (EBCM) controls the current through the variable effort steering actuator located on the steering gear. The



current used to control the actuator is between 0-1 A. At low speeds and in parking lot maneuvers the current is applied to the actuator causing the



orifice to open increasing fluid flow and reducing the steering effort. At high speeds the orifice is commanded closed by reducing current through



the actuator and restricting fluid flow increasing steering effort. The EBCM monitors and compares the commanded and feedback current



parameters to detect malfunctions in the variable effort steering system.



Conditions for Running the DTC



* Ignition ON.



* Ignition voltage is greater than 8 volts.



Conditions for Setting the DTC



A malfunction, open/high resistance, a invalid signal or a high current is detected on the high control or low control circuit.



Action Taken When the DTC Sets



* The driver information center displays SERVICE POWER STEERING SYSTEM.



* The variable effort steering system is disabled for the remainder of the ignition cycle.



Conditions for Clearing the DTC



* The condition for setting the DTC is no longer present and the DTC is cleared with a scan tool.



* The EBCM automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles.



Diagnostic Aids



The vehicle may need to be driven to view full actuator commanded and actuator feedback data parameters.



Reference Information



Schematic Reference



Power Steering Schematics (See: Steering and Suspension/Steering/Diagrams/Electrical Diagrams)



Connector End View Reference



Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)



Description and Operation



Variable Effort Steering System Description and Operation (See: Steering and Suspension/Steering/Description and Operation/Variable Effort



Steering System)



Electrical Information Reference



* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit



Testing/Circuit Testing)



* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic



Procedures/Connector Repairs/Connector Repairs)



* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General



Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)



* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring



Repairs/Wiring Repairs)

No comments:

Post a Comment