2010 Cadillac Truck SRX FWD V6-3.0L Page 1339

2010 Cadillac Truck SRX FWD V6-3.0L Page 1339

Circuit/System Description

The engine control module (ECM) supplies voltage to each fuel injector on the injector high voltage supply circuits. The ECM energizes each fuel

injector by grounding the high voltage control circuit of the fuel injector. The ECM monitors the status of the injector high voltage supply circuits

and the fuel injector high voltage control circuits. When a fuel injector circuit condition is detected by the ECM, the affected fuel injector(s) is

disabled.

Conditions for Running the DTC

* The engine is running.

* The ignition voltage is between 11-18 V.

* The DTCs run continuously once the above conditions are met.

Conditions for Setting the DTC

P0201, P0202, P0203, P0204, P0205, or P0206

The ECM detects the injector high voltage supply circuit or the injector high voltage control circuit is open for greater than 2 s.

P0261, P0264, P0267, P0270, P0273, or P0276

The ECM detects the injector high voltage control circuit is shorted to ground for greater than 2 s.

P0262, P0265, P0268, P0271, P0274, or P0277

The ECM detects the injector high voltage control circuit is shorted to voltage for greater than 2 s.

Action Taken When the DTC Sets

DTCs P0201, P0202, P0203, P0204, P0205, P0206, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, and P0277

are Type A DTCs.

Conditions for Clearing the DTC

DTCs P0201, P0202, P0203, P0204, P0205, P0206, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, and P0277

are Type A DTCs.

Diagnostic Aids

* Performing the fuel injector coil test may help isolate an intermittent condition. Refer to Fuel Injector Solenoid Coil Test (LAU) (See:

Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Testing and Inspection)Fuel Injector Solenoid Coil Test (LF1, LFW)