2010 Cadillac Truck SRX FWD V6-3.0L Page 1966

2010 Cadillac Truck SRX FWD V6-3.0L Page 1966

P0121

The ECM detects that the TP sensor 1 voltage is stuck in range for less than 1 s.

P0122

The ECM detects that the TP sensor 1 voltage is less than 0.3 V for less than 1 s.

P0123

The ECM detects that the TP sensor 1 voltage is greater than 4.8 V for less than 1 s.

P0222

The ECM detects that the TP sensor 2 voltage is less than 0.3 V for less than 1 s.

P0223

The ECM detects that the TP sensor 2 voltage is greater than 4.6 V for less than 1 s.

P2135

The ECM detects that TP sensor 1 and TP sensor 2 disagree greater than 7-10 percent for less than 1 s.

Action Taken When the DTC Sets

P0121

* DTC P0121 is a type B DTC

* The ECM commands the throttle actuator control (TAC) system to operate in a Reduced Engine Power mode.

P0122, P0123, P0222, P0223, or P2135

* DTC P0122, P0123, P0222, P0223, and P2135 are type A DTCs

* The ECM commands the throttle actuator control (TAC) system to operate in a Reduced Engine Power mode.

Conditions for Clearing the DTC

* DTC P0121 is a type B DTC.

* DTCs P0122, P0123, P0222, P0223 and P2135 is a type A DTC.

Diagnostic Aids

A high resistance condition on the throttle position and throttle actuator control circuits could cause a DTC to set.

Reference Information

Schematic Reference

Engine Controls Schematics (LAU) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)Engine Controls Schematics

(LF1) (See: Diagrams/Electrical Diagrams/Powertrain Management/System Diagram)

Connector End View Reference

Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

Description and Operation

Throttle Actuator Control (TAC) System Description (See: Powertrain Management/Computers and Control Systems/Description and

Operation/Throttle Actuator Control (TAC) System Description)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

Repairs/Wiring Repairs)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code