2010 Cadillac Truck SRX FWD V6-3.0L Page 1433
1. Using a scan tool, verify the following DTCs are not set: P0325, P0327, P0328, P0330, P0332, and P0333.
瀚慖f any of the DTCs are set, diagnose them first.
2. DTCs P06B6 and P06B7 indicate an internal ECM circuitry failure. Verify the external knock sensor circuits and connectors for proper
condition.
瀚慖f no external knock sensor circuit issues exist, replace the K20 ECM.
Repair Instructions
* Knock Sensor Replacement - Bank 1 (See: Powertrain Management/Computers and Control Systems/Knock Sensor/Service and
Repair/Knock Sensor Replacement - Bank 1)
* Knock Sensor Replacement - Bank 2 (See: Powertrain Management/Computers and Control Systems/Knock Sensor/Service and
Repair/Knock Sensor Replacement - Bank 2)
* Control Module References (See: Testing and Inspection/Programming and Relearning) for ECM replacement, setup, and programming
Repair Verification
Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.
P0332
DTC P0324-P0328, P0330-P0333, P06B6, or P06B7 (LF1)
Diagnostic Instructions
* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System
Check - Vehicle) prior to using this diagnostic procedure.
* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an
overview of the diagnostic approach.
* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure
Instructions) provides an overview of each diagnostic category.
DTC Descriptors
DTC P0324
- Knock Sensor System Performance
DTC P0325
- Knock Sensor Circuit Bank 1
DTC P0326
- Knock Sensor Performance Bank 1
DTC P0327
- Knock Sensor Circuit Low Voltage Bank 1
DTC P0328
- Knock Sensor Circuit High Voltage Bank 1
DTC P0330
- Knock Sensor Circuit Bank 2
DTC P0331
- Knock Sensor Performance Bank 2
DTC P0332
- Knock Sensor Circuit Low Voltage Bank 2
DTC P0333
- Knock Sensor Circuit High Voltage Bank 2
DTC P06B6
- Control Module Knock Sensor Processor 1 Performance
DTC P06B7
- Control Module Knock Sensor Processor 2 Performance
Diagnostic Fault Information
No comments:
Post a Comment