Thursday, December 30, 2021

2010 Cadillac Truck SRX FWD V6-3.0L Page 1851

2010 Cadillac Truck SRX FWD V6-3.0L Page 1851



DTC Descriptors



DTC P0976



- Shift Solenoid (SS) 2 Control Circuit Low Voltage



DTC P0977



- Shift Solenoid (SS) 2 Control Circuit High Voltage



Diagnostic Fault Information



Circuit/System Description



The shift solenoid (SS) 2 is part of the control solenoid valve assembly which has no serviceable components. SS 2 is a normally closed (NC)



ON/OFF solenoid and is controlled by the TCM through a low side driver. When the SS 2 is energized (ON), SS 2 fluid pressure is directed to the



clutch select valve 3, which allows the valve to overcome the spring pressure and move to the applied position. Power to the SS 2 is supplied by the



TCM through a high side driver (HSD). The HSD protects the circuit and components from excessive current flow. If excessive current flow is



detected, the HSD will turn OFF. When the fault is corrected, the HSD will reset.



Conditions for Running the DTC



P0976



* The engine speed is greater than 400 RPM for 5 seconds.



* The ignition voltage is 8.6 volts or greater.



* DTC P0976 has not set this ignition cycle.



P0977



* The engine speed is greater than 400 RPM for 5 seconds.



* The ignition voltage is 8.6 volts or greater.



* DTC P0977 has not set this ignition cycle.



Conditions for Setting the DTC



P0976



The TCM detects a short to ground on the SS 2 control circuit for 2 seconds.



P0977



The TCM detects an open or short to power on the SS 2 control circuit for 2 seconds.



Action Taken When the DTC Sets



P0976



* DTC P0976 is a Type B DTC.



* The TCM freezes transmission adaptive functions.



* The TCM commands maximum line pressure.



P0977



* DTC P0977 is a Type A DTC.



* The TCM limits the transmission to reverse and 5th gear.



* The TCM inhibits the torque converter clutch (TCC).



* The TCM commands maximum line pressure.



* The TCM freezes transmission adaptive functions.



* The TCM turns the high side driver OFF.



* The TCM inhibits Tap Up/Down function.



* The TCM inhibits manual shifting of forward gears.



Conditions for Clearing the DIC/DTC



* DTC P0976 is a Type B DTC.



* DTC P0977 is a Type A DTC.



Reference Information



Connector End View Reference

No comments:

Post a Comment