2010 Cadillac Truck SRX FWD V6-3.0L Page 1847

2010 Cadillac Truck SRX FWD V6-3.0L Page 1847

The control solenoid valve assembly detects an open or a short to power on the SS 1 control circuit for 2 seconds.

Action Taken When the DTC Sets

P0973

* DTC P0973 is a Type A DTC.

* The TCM limits the transmission to reverse and 5th gear.

* The TCM inhibits torque converter clutch (TCC) engagement.

* The TCM commands maximum line pressure.

* The TCM freezes transmission adaptive functions.

* The TCM inhibits Tap Up/Down function.

* The TCM inhibits manual shifting of forward gears.

P0974

* DTC P0974 is a Type B DTC.

* The TCM inhibits 1st gear.

Conditions for Clearing the DIC/DTC

* DTC P0973 is a Type A DTC.

* DTC P0974 is a Type B DTC.

Reference Information

Connector End View Reference

* Component Connector End Views (See: Diagrams/Connector Views/Connector End Views By Name)

* Inline Harness Connector End Views (See: Diagrams/Connector Views/Multiple Junction Connector/Connector End Views By Number)

Description and Operation

Transmission General Description (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Description and Operation/6T70/6T75 -

Automatic Transmission/Transmission General Description)

Electrical Information Reference

* Circuit Testing (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Circuit

Testing/Circuit Testing)

* Connector Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic

Procedures/Connector Repairs/Connector Repairs)

* Testing for Intermittent Conditions and Poor Connections (See: Testing and Inspection/Component Tests and General Diagnostics/General

Electrical Diagnostic Procedures/Circuit Testing/Testing for Intermittent Conditions and Poor Connections)

* Wiring Repairs (See: Testing and Inspection/Component Tests and General Diagnostics/General Electrical Diagnostic Procedures/Wiring

Repairs/Wiring Repairs)

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions (See: Diagnostic Trouble Code Descriptions/Powertrain Diagnostic Trouble Code

(DTC) Type Definitions)

Scan Tool Reference

Control Module References (See: Testing and Inspection/Programming and Relearning) for scan tool information

Special Tools

DT-47825-20 Adapter Harness

Circuit/System Verification

1. Operate the vehicle in second gear long enough to ensure at least a 3掳C (5掳F) rise in TCM temperature, then operate the vehicle in Park for 5

seconds.

2. Place the gear selector in Reverse for 5 seconds and then idle the vehicle in Park for 5 seconds. Verify with a scan tool the following test

status parameters display OK:

* Shift Sol. 1 Ctrl. Ckt. High Voltage Test Status

* Shift Sol. 1 Ctrl. Ckt. Open Test Status

* Shift Sol. 1 Ctrl. Ckt. Low Voltage Test Status

3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the

conditions that you observed from the Freeze Frame/Failure Records data.

Circuit/System Testing