Monday, October 18, 2021

2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 09-08-44-013D Date: 120626

2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 09-08-44-013D Date: 120626



Audio System - USB/Multimedia Interface Information



INFORMATION



Bulletin No.: 09-08-44-013D



Date: June 26, 2012



Subject: Information on USB Command and Control Multimedia Player Interface/List of Supported Devices



Models:



2010-2013 Buick Enclave, LaCrosse



2008-2013 Cadillac CTS



2010-2011 Cadillac Escalade Models



2010-2012 Cadillac SRX



2009-2010 Chevrolet Cobalt



2009-2011 Chevrolet HHR



2009-2013 Chevrolet Malibu



2010-2013 Chevrolet Avalanche, Camaro, Equinox, Silverado, Suburban, Tahoe, Traverse



2011-2013 Chevrolet Cruze



2010-2013 GMC Acadia, Sierra, Terrain, Yukon



2009-2010 Pontiac G5, G6, Solstice, Solstice Coupe



2009-2010 Saturn AURA, SKY



2010 Saturn OUTLOOK



All Equipped with Convenience and Connectivity Package - RPOs KTA, KTB, SRJ, U4H, UUI, UUJ, UUM, UUN, U2S, U2X, U2Y, UAV, UYZ,



UY5



Supercede:



This bulletin is being revised to add models and 2012-2013 model years. Please discard Corporate Bulletin Number 09-08-44-013C (Section 08 -



Body and Accessories).



2010 Cadillac Truck SRX AWD V6-3.0L Page 39



USB Radio and MP3 Functionality



The USB (Universal Serial Bus) will be a USB 2.0 port on the radio faceplate, on the IP or in the center console. This interface will give the



customer the additional functionality of iPod/MP3 command and control. Customers now have full radio control of the iPod/MP3 audio files via the



USB cable. A single USB connection allows digital audio transferring from the iPod to the radio. The customer will also have playback capability



with a USB memory stick (only MP3 and WMA files).



Note



Not all memory sticks are supported.



Customers have full radio control of the iPod/MP3 audio files via the USB cable. A single USB connection allows digital audio transferring from



the iPod to the radio. The iPod will be charging while connected to the radio.



Note



Video from the iPod is NOT capable of being transferred to a Navigation radio display.



For the Chevrolet Cobalt, HHR and Malibu; Pontiac G5, G6, Solstice; and Saturn AURA, SKY, the USB port is on the faceplate of the radio. For



all other models, it is located in the center console or IP.



For the Cadillac CTS only, a special iPod cable (USB and AUX cable) is needed. This special cable comes delivered with the vehicle. In all cases,



the iPod will be charging while connected to the radio through the USB port when the vehicle is running or the RPA is active.



Problems with iPod Not Connecting



If the infotainment system does not operate properly when using a device connected through the USB port, this may be due to an incompatible



media device.



Important



DO NOT replace the radio or multimedia interface module due to a customer device incompatibility issue.



Verify the customer's media device is validated for this system using the list below. If the customer's device is a validated device for this system,



follow the SI diagnostic procedure to isolate the fault. If the customer's device is not on the validated device list, explain to the customer that their



particular unit is not compatible with the system.



Troubleshooting Tips for iPod Devices



1. Check the version of the iPod/MP3 to confirm that it is supported.



2. Unplug and Re-insert the iPod to verify the customer complaint.



3. Verify the battery charge of the iPod. A low battery condition on the iPod may not allow it to connect to the radio. The iPod may need to be



charged before it can be controlled by the radio.



4. If the customer receives a "Device Not Supported" message on their radio or is having general iPod/MP3 connection issues (and they have a



supported device), they may need to reset their iPod. To reset the iPod:



- For the iPod Nanos and Classic , Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again. Press and hold the Menu



and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 8 seconds. You may need to repeat this step.



- For the iPod Touch and iPhone: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the



slider.



5. Have the customer check their cable for quality.



- Aftermarket cables can wear from use. The customer may need to purchase a new USB cable.



- Verify that cable extensions are not present. The extra capacitance may cause too large a signal drop for the iPod to communicate with the



radio.



6. If the customer receives a "Device Not Supported" message on their radio with an iPod connected (and they have a supported device), the



customer may need to download the latest firmware from the Apple website (Please visit www.apple.com for more information).



Validated Apple Device - Both Charge/Support Digital Audio (For All RPOs)



For further information on identifying iPod models, please visit http://support.apple.com/kb/ht1353



2010 Cadillac Truck SRX AWD V6-3.0L Page 40



Other Validated Device- Both Charge/Support Digital Audio for Buick LaCrosse, Chevrolet Camaro, Equinox Only (RPO KTA or KTB)



Important



Must be set to MTP (Mass Transfer Protocol) in the MP3 Player device setting.



Important



These devices (and additional MP3 players) may be capable of connecting to the other USB options by internally setting the MP3 device to



MSC (Mass Storage Class) mode. In this mode, the USB port will see the device as a flash drive. Please have the customer refer to their



MP3 device manual on how to set the device to MSC. If the device is not able to be set to MSC, the customer must use the AUX jack.



Note



MTP mode must be used in order to transfer ANY Digital Rights Management (DRM) protected content.



Non-Validated Apple Device



2010 Cadillac Truck SRX AWD V6-3.0L Page 41



Important



The following devices are NOT supported by USB interface. Apple does not support digital media transfer from these devices through the USB



port. The customer can still listen to their older iPod on vehicle by connecting it to the Auxiliary Input Jack using a standard 3.5 mm (1/8 in) stereo

No comments:

Post a Comment