Figure legend(Shop-made tool)
- 1xClutch 140 545 35 28
- 2xContact spring 004 545 56 26
- 1xRed banana connector
- 1xBlack banana connector
- 2,2 mRed cable with diameter 1,5 mm(Pin 1)
- 2,2 mBrown cable with diameter 1,5 mm(Pin 2)
- 2 mInsulation sheathing with diameter 6 mm
Test sequence
- Switch off ignition.
- Remove fuel rail together with component Y62y2 (Fuel injector cylinder 2).
- Bridge between sockets (F.2) 98 and (F.17) 113 of the 126-pole socket box tester.
- Switch on ignition.
- Component M3 (Fuel pump) runs.
- Hold component Y62y2 (Fuel injector cylinder 2) in a vessel and briefly operate manually with shop-made test cable set at sockets 98 and 99
of the 126-pin socket box.
Specified value
- Fuel injectors should eject fuel uniformly.
No comments:
Post a Comment