2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 07-08-49-020G Date: 120917

2010 Cadillac Truck SRX AWD V6-3.0L Technical Service Bulletin # 07-08-49-020G Date: 120917

Instruments - IPC Odometer Programming Method

INFORMATION

Bulletin No.: 07-08-49-020G

Date: September 17, 2012

Subject: IPC Odometer Programming Method Quick Reference Guide

2010 Cadillac Truck SRX AWD V6-3.0L Page 13

Models:

2003-2013 GM Passenger Cars and Trucks

Attention:

This bulletin applies to vehicles sold in the U.S. and Canada Only.

..........................................................................................................................................................................................................................................

Supercede:

This bulletin is being revised to add the 2012-2013 Captiva Sport and 2013 Orlando (Canada). Please discard Corporate Bulletin Number

07-08-49-020F (Section 08 - Body and Accessories).

..........................................................................................................................................................................................................................................

The purpose of this bulletin is to provide a reference guide to help identify which season odometer programming method to use after replacing the

instrument panel cluster (IPC). The three season odometer programming methods in use today are listed below. In addition, this reference guide

lists the component where the season odometer value is stored. The season odometer value may be stored in the IPC, the driver information center

(DIC) or the integrated body control module (IBCM), also commonly called a body control module (BCM).

Season Odometer Programming Methods in Use Today

1. IPC reprogramming and setup using the service programming system (SPS).

2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC.

3. Tech 2(R) - The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the

IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or

driving the vehicle.

*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.

2010 Cadillac Truck SRX AWD V6-3.0L Page 14

2010 Cadillac Truck SRX AWD V6-3.0L Page 15

2010 Cadillac Truck SRX AWD V6-3.0L Page 16